JBL AWC129-LG All-Weather Coax 12-Inch 2-way Light Gray (Each)

AWC129-LG - Overview

• Features:

  • Highly weather-resistant IP56 rating
  • Consistent 90° x 90° broadband pattern control
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 55 Hz - 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 ohm low-impedance
  • Components: 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil. 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
   

• Specifications:

  • Frequency Range (-10 dB): 55 Hz - 20 kHz
  • Frequency Response (±3 dB): 80 Hz - 20 kHz
  • Coverage Pattern: 90° x 90°
  • Directivity Factor (Q): 10.1 (1 k - 16 kHz)
  • Directivity Index (DI): 9.5 dB (1k - 16 kHz)
  • Long-Term System Power Rating (IEC): 400 W (1600 W peak), 2 hrs.
  • 250 W (1000 W peak), 100 hrs
  • Sensitivity (2.83V @ 1m) 96 dB (Ave. 80 Hz - 20 kHz)
  • Maximum SPL Direct 8O: 122 dB (peaks of 128 dB)
  • 200 W Tap: 119 dB
  • Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
  • Nominal Impedance: 8 ohms
  • Transformer Taps: 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W
  • Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.
  • High Frequency Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
    
    HF Driver Protection
  • Minimum audibility SonicGuardT HF overload protection
    
    Enclosure
  • ABS with Glass enclosure, heavily braced
  • Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
  • Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing.
    
    Input Connection
  • CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
    
    Environmental
  • IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs)
   

• GTIN:

  0050036904193