JBL CONTROL 85M Compact 5 Inch Mushroom-Style Landscape Speaker - Each

CONTROL 85M - Overview

• Features:

  • Components:
  • 5¼" highly weather-resistant driver
  • ¾" soft-dome highly weather-resistant tweeter
  • 80W Pink Noise Power Handling (160W program) in direct 8Ω setting, plus built-in 30W 70V/100V multi-tap transformer
  • Tough polyethylene highly weather resistant enclosure
  • Fully isolated center chamber for wiring protection
  • High fidelity sound character with broad frequency range of 55Hz-18kHz
   

• Specifications:

  • Frequency Response: (-10dB) 55 Hz - 18 kHz
  • Power Rating: 160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs)
  • Transformer Taps: 70V: 30W, 15W, 7.5W & 3.8W
  • 100V: 30W, 15W, 7.5W
  • Frequency Response: (±3 dB) 65Hz-16 kHz
  • Maximum Input Voltage: 23.3 V
  • Sensitivity: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz)
  • Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
  • Directivity: (Q) 2.2
  • Directivity Index: (DI) 3.4 dB
  • Maximum SPL: 105 dB @ 1m
  • Nominal Impedance: 8Ω (at 8Ω setting)
  • Insertion Loss: <1.0 dB at any tap setting
  • Thru Setting: 8Ω nominal
  • Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF
  • Recommended Protective High-Pass: 65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
  • Low Frequency Driver: 135 mm (5.25 in) diameter LF driver, KaptonT former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
  • High Frequency: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
  • Enclosure Material: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
  • Grille: Powder coated stainless steel.
  • Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
  • Agency Ratings: UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
  • Terminals: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
  • Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16" in and 0.35" in). For installation instructions see Installation Guide (# IS C80MLS).
  • Colors: Hunter Green, RAL6018
  • Dimensions: (H x W x D) 432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
  • Net Weight: 5.5 kg (12 lb)
  • Shipping Weight: 7.3 kg (16 lb)
   

• Item Includes:

  • (2) wire nuts
  • (2) gland nuts
  • (1) right-angle screwdriver
  • 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
   

• GTIN:

  0691991005077