Where to Buy Radio Design Labs | RDL Rack-Ups, Stick-Ons & More

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

RDL TX-AFC1M Unbalanced to Balanced Audio Transformer - RCA / XLR
Item# TX-AFC1M
The RDL TX-AFC1M is the ideal choice in certain applications requiring studio quality transformer coupling between an unbalanced audio source and balanced equipment. This module is passive and does not add gain to the converted signal. Numerous active RDL modules are available to produce unbalanced to balanced conversion while changing the level from -10 dBV and +4 dBu. The TX-AFC1M is a single channel (mono) module featuring a phono jack input and male XLR output. A studio quality audio...
Our Price: $132.35
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL ST-DA3 Line Level Distribution Amplifier - 1x3
Item# ST-DA3
The RDL ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known. The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from...
Our Price: $201.39
Availability: In Stock
Add to Wish List
RDL RU-MLB4 Mic/Line Bi-Directional DANTE Network Interface
Item# RDL-RU-MLB4
The RDL RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. Application The RU-MLB4 is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional...
Our Price: $843.13
Availability: In Stock
Add to Wish List
RDL TX-MVX Manual Remote Controlled Video Switch - 2x1 - BNC
Item# TX-MVX
The RDL TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals. VIDEO A is normally connected to COMMON. When the TRIG terminal is pulled to ground, VIDEO B is connected to COMMON and VIDEO A is disconnected. The TX-MVX utilizes a high-quality RF relay allowing the module to either route a single video source to one of two destinations, or switch two video sources to a single video destination. The actual switch (or other module...
Our Price: $141.23
Availability: In Stock
Add to Wish List
RDL STM-1 Microphone Preamplifier - 50 dB Gain
Item# STM-1
The RDL STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications. The compact size makes it ideal where a larger or heavier preamp cannot be used. The high-performance circuit provides a fixed 50 dB gain to bring any mic-level signal up to the line-level range of nearly any line input. The STM-1 supply input is single ended and operates from 24 to 33 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. For intercom applications,...
Our Price: $149.96
Availability: In Stock
Add to Wish List
RDL AV-HK1 HUM KILLER Stereo Audio Isolation Transformer
Item# AV-HK1
The AV‑HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold‑plated phono jacks. The AV‑HK1 is supplied with two adapter cables to facilitate connecting with products that use mini‑plugs and jacks. The shield connection of each INPUT jack is electrically isolated from the case and from the output ground. The shield connection of each OUTPUT jack is connected to the case shield....
Our Price: $128.11
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL RU-VSX4 Video Switcher - 4x1 - BNC
Item# RU-VSX4
The RU-VSX4 is the ideal choice in most applications where four video signals need to be switched to a single output. The RU-VSX4 has two rear panel-jacks for each of the four video bridging input stages. One jack is for the input signal; the other is a loop-through output of the source signal. If 75 Ohm termination of the input signal is required, the terminator (provided) is plugged onto the LOOP OUT jack. The output video signal is 75 Ohm back-terminated to provide unity gain into a 75 Ohm terminated...
Our Price: $495.12
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL RU-ASX4D 4x1 Stereo Balanced Audio Switcher - Terminal Block
Item# RDL-RU-ASX4D
The RDL RU-ASX4D is a four channel stereo audio selector with input gain adjustments and output level metering. The inputs and outputs are connected on rear-panel detachable terminal blocks. Each of the four stereo line level inputs accepts either a balanced or an unbalanced signal. Each input is equipped with a rear panel screwdriver-adjustable input gain trimmer. Input signal levels between -15 dBV and +8 dBu may be set to the proper operating level as indicated by a stereo dual-LED...
Our Price: $409.12
Availability: In Stock
Add to Wish List
RDL D-XLR2F Dual XLR 3-pin Female Jacks on Decora Wall Plate with Terminal Block connections on rear
Item# D-XLR2F
Dual XLR 3-pin Female Jacks on Decora Wall Plate with Terminal Block connections on rear. Features: Specifications:
Our Price: $26.09
Availability: In Stock
Add to Wish List
Radio Design Labs RU-ADA4D 4 Channel Stereo Audio Distribution Amplifier
Item# RDL-RU-ADA4D
The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks. Each of the two line level inputs accepts either a balanced or an unbalanced signal. Each input is equipped with a front panel INPUT GAIN trimmer. Input signal levels between -14 dBV unbalanced and...
Our Price: $360.88
Availability: In Stock
Add to Wish List
RDL ST-NG1 White and Pink Noise Generator
Item# ST-NG1
The ST-NG1 is the ideal choice where random white or pink noise is needed. It is suitable either as a reference noise source for audio measurements or as a masking noise source in engineered sound or counter-intelligence applications. Amplitude limiting circuitry in the ST-NG1 controls extreme peak excursions while preserving random variations of at least 20 dB. The noise generating circuitry in the ST-NG1 is truly random analog noise occupying the full bandwidth from 20 Hz to 20 kHz. This makes...
Our Price: $185.65
Availability: In Stock
Add to Wish List
RDL TX-A2 Balanced to Unbalanced Audio Converter
Item# RDL-TX-A2
The TX-A2 is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level mono source and consumer equipment unbalanced inputs. The TX-A2 is a complete unbalanced line-level audio output module. The front panel provides a detachable terminal block for connection of a balanced +4 dBu audio source. The input signal is coupled to two front-panel gold plated RCA jacks through a studio-quality isolation transformer. Each output is coupled...
Our Price: $126.32
Availability: In Stock
Add to Wish List
RDL DB-D2 Double Plate for Standard and Specialty Connectors
Item# RDL-DB-D2
The RDL DB-D2 is a double plate for standard and specialty connectors. These plates feature all-steel construction and customizable front-panel text. The DB-D2 are compatible with Decora®-style mounting accessories. Features: All-Steel Construction Compatible with Decora®-Style Mounting Accessories Customizable Front-Panel Text Specifications:
Our Price: $23.59
Availability: In Stock
Add to Wish List
RDL TX-A2D Dual Audio Converter - Balanced to Unbalanced
Item# RDL-TX-A2D
The RDL TX-A2D is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level stereo source and consumer equipment unbalanced inputs. The TX-A2D is a complete unbalanced stereo line-level audio output module. The front panel provides a detachable terminal block for connecting each channel of a balanced +4 dBu audio source. The input signals are coupled to two front-panel gold plated phono jacks through studio-quality isolation...
Our Price: $150.85
Availability: In Stock
Add to Wish List
RDL PS-24AS 500mA AC/DC Power Supply For Stick-Ons & Rack Ups
Item# PS24V
RDL PS-24AS is a 500mA AC/DC Power Supply For Stick-Ons & Rack Ups.
Our Price: $32.48
Availability: In Stock
Add to Wish List
RDL STA-1M Audio Line Amplifier - Mono: -14 to 14 dB Gain
Item# STA-1M
The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the differential input, regardless of ground reference. The output is capable of driving either high or low impedance loads, and the output may be connected either balanced or unbalanced. RDL's SupplyFlex power...
Our Price: $154.97
Availability: In Stock
Add to Wish List
RDL ST-SSR1 Line-Level Audio Switch - 2x1
Item# ST-SSR1
The ST-SSR1 was designed for absolute silent switching of audio signals. It supports two balanced line-level inputs and one balanced output. Each can be used unbalanced as well. The ST-SSR1 is perfect for switching between two input signals or as a silent On/Off switch for a single channel. Performance is in keeping with the technical standards for which RDL has become known. The user can program the module for either fast or soft switching. The SELECT input feeds the OUTPUT when the TRIG terminal...
Our Price: $152.56
Availability: In Stock
Add to Wish List
RDL ST-PA6 6 W Mono Audio Amplifier - 8 Ohm
Item# ST-PA6
The RDL ST-PA6 represents the second generation of RDLs breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 watts of power for a price you would expect to pay for 3 watts. The ST-PA6 features two balanced audio inputs, a gain control, equalization control and an 8 Ohm output. The output is designed to deliver a clean 6 watts RMS into an 8 Ohm speaker. Each input is a balanced bridge,...
Our Price: $138.40
Availability: In Stock
Add to Wish List
RDL SF-DN4 Two Left/Right Digital Audio to Four Dante Network Audio Signal Interface
Item# RDL-SF-DN4
The RDL SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S/PDIF optical, S/PDIF coaxial, or AES/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network. A yellow front-panel LOCK LED indicates a valid source received without any lock errors. Special software is not required to configure the module. The SF-DN4 is a professional...
Our Price: $716.92
Availability: In Stock
Add to Wish List
RDL SF-BNC2 Bidirectional Unbalanced Stereo Audio Network Interface
Item# RDL-SF-BNC2
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital...
Our Price: $669.73
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL STD-10K Passive Audio Divider/Combiner - 10 k Ohm
Item# STD-10K
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with output shorting switches into a single amplifier input. The STD modules are available in 150 Ohm, 600 Ohm and 10 k Ohm models. All inputs and outputs are balanced. The STD-10K is passive and does NOT require...
Our Price: $80.01
Availability: In Stock
Add to Wish List
RDL ST-UMX3 3x1 Universal Audio Mixer - 3 Mic or Line Inputs x 1 Mic or Line Out
Item# ST-UMX3
The ST-UMX3 is a three-channel audio mixer for combining mic-level or line-level signals to a single output. A MIC/LINE switch is provided for each input. A separate MIC/ LINE switch selects the output level. Each input features a separate preamplifier circuit, which isolates it from the other inputs. An audio taper single turn gain adjustment is provided for each of the three input preamps. Signals from the three preamps are actively summed and fed to the output amplifier which includes an RDL...
Our Price: $193.43
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL STD-600 Passive Audio Divider/Combiner - 600 Ohm
Item# STD-600
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with output shorting switches into a single amplifier input. The STD modules are available in 150 Ohm, 600 Ohm and 10 k Ohm models. All inputs and outputs are balanced. Features: 600 Ohm Operation Combine Audio...
Our Price: $79.53
Availability: In Stock
Add to Wish List
RDL DB-XLR3F XLR 3-pin Female Jack on Decora Wall Plate - Terminal Block
Item# RDL-DB-XLR3F
RDL DB-XLR3F XLR 3-pin Female Jack on Decora Wall Plate with Terminal Block connection on rear. Features: Specifications:
Our Price: $21.96
Availability: In Stock
Add to Wish List
RDL TX-J2 Unbalanced Input Transformer
Item# TX-J2
The TX-J2 is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors. The ultra-compact TX series can be mounted in limited space using the adhesive methods popularized by RDL's STICK-ONr Series. The TX-J2 may be mounted directly to a backboard or chassis using a variety of mounting options available from Radio Design Labs. The...
Our Price: $83.96
Availability: In Stock
Add to Wish List
RDL D-XLR2M Dual XLR 3-pin Male Jacks on Decora© Wall Plate with terminal block on rear
Item# RDL-D-XLR2M
The RDL D-XLR2M Dual XLR 3-pin Male Jacks on Decora© Wall Plate with rear panel connections on terminal block. Features: All-Steel Construction Compatible with Decorar-Style Mounting Accessories Rear Panel Connections on Terminal Block Customizable Front-Panel Text Specifications:
Our Price: $24.68
Availability: In Stock
Add to Wish List
RDL DB-XLR2F Dual XLR 3-pin Female Jacks on Decora Wall Plate - Terminal Block
Item# RDL-DB-XLR2F
The RDL DB-XLR2F Dual XLR 3-pin Female Jacks on Decora Wall Plate with terminal block connector on rear. Features: All-Steel Construction Compatible with Decora Style Mounting Accessories Rear Panel Connections on Terminal Block Customizable Front-Panel Text Specifications:
Our Price: $26.09
Availability: In Stock
Add to Wish List
RDL D-XLR3M XLR 3-pin Male Jack on Decora Wall Plate with Terminal Block connections on rear
Item# D-XLR3M
XLR 3-pin Male Jack on Decora Wall Plate with Terminal Block connections on rear. Features: Specifications:
Our Price: $21.96
Availability: In Stock
Add to Wish List
RDL EZ-HSX4 4x1 Stereo Audio Input Switcher with Headphone Amp
Item# EZ-HSX4
The EZ series offers unparalleled flexibility. Each unit is fully labeled on the front and rear for use either as a finished product or as a utility module. Installation of multiple products is quick and easy using the comprehensive range of EZ rack mounts, chassis, bezels, drawers and accessories. High quality full-size switches, long life controls, quality connectors, solid-state audio and video switching, gold plating and superior engineering combine to make EZ the best value in the industry....
Our Price: $234.62
Availability: 2+ Weeks
Add to Wish List
RDL SF-ND2 Two Dante Network Audio Channels to Stereo Digital Audio Output Interface
Item# RDL-SF-ND2
The RDL SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance. The SF-ND2 is PoE powered....
Our Price: $468.52
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL RM-D3 19 Inch Rack Mount for 3 Decora Modules
Item# RDL-RM-D3
The RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. Features: Specifications:
Our Price: $80.92
Availability: In Stock
Add to Wish List
RDL STM-3 High Gain Microphone Preamplifier - 35 to 75 dB Gain
Item# STM-3
The STM-3 is a quality low-noise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required. The STM-3 is very flexible, with gain adjustment from 45 to 75 dB, two balanced or unbalanced outputs, and available phantom supply input. Its low-distortion and low-noise performance make it the best choice, even when larger preamps could be used. The single-ended supply input range is from 24 to 33 Vdc. Operation from 12...
Our Price: $235.59
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL RU-VCA2A Digitally Controlled 2 Channel Audio Attenuator
Item# RDL-RU-VCA2A
The RU-VCA2A by RDL is a full-featured studio-quality dual-channel audio attenuator module for local and/or remote control of balanced or unbalanced line-level sources. Each module can be remote controlled from a single or multiple locations. Rear-panel terminals provide flexible control options using a variety of RDL remote controls or OEM equipment. Audio levels are controlled in 0.5 dB steps using noiseless zero-crossing digital attenuators for optimum reliability, precise...
Our Price: $450.01
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL PT-AMG2 Portable Audio Signal Generator & Monitor
Item# PT-AMG2
This RDL PT-AMG2 portable audio instrument is comprised of a precision audio oscillator, precision level meter and speaker. The 700 Hz oscillator section features two outputs. The balanced XLR output is front-panel switch selectable for MIC or LINE level (pro level). The unbalanced output operates at -10 dBV (consumer). Output stability is suited to accurate bench top audio testing. The audio metering circuit features two inputs, an LED meter and a monitor speaker. The balanced input...
Our Price: $431.25
Availability: In Stock
Add to Wish List
RDL TX-10B Bridging Input Transformer
Item# TX-10B
RDL TX-10B is a TX™ Series bridging input transformer. Add transformer isolation to any line-level audio input with balanced input and output. Features: Add transformer isolation to any line-level audio input Balanced input and output 10 kΩ input bridges any audio line Frequency response: 20 Hz to 20 kHz (+/- 0.5 dB) THD: (1 kHz) Specifications: Height: 3.0 in 7.6 cm Width: 1.2 in 3.0 cm Depth (case): 1.5 in 3.8...
Our Price: $59.38
Availability: In Stock
Add to Wish List
Radio Design Labs D-XLR2 XLR 3-pin Female & 3-pin Male on Decora Wall Plate with Terminal Block connections on rear
Item# D-XLR2
Radio Design Labs D-XLR2 XLR XLR 3-pin Female & 3-pin Male on Decora Wall Plate with Terminal Block connections on rear. Features: All-Steel Construction Compatible with Decorar-Style Mounting Accessories Rear Panel Connections on Terminal Block Customizable Front-Panel Text Specifications:
Our Price: $26.09
Availability: In Stock
Add to Wish List
RDL FP-PA18H 18 W Mono Hi-Temp Audio Amplifier 8 Ohm with Power Supply
Item# FP-PA18H
The FP-PA18H is a high efficiency 18 W power amplifier with a line input, 8 ohm output and audio compressor capable of operation in a high ambient temperature environment. The thermal characteristics of the module case and construction throughout using high temperature components permit operation over a range of 0 to 70 degrees C. The FP-PA18H is ideally suited to outdoor applications, signage and other installations where ambient temperatures may become elevated due to limited convection. The...
Our Price: $257.43
Availability: 2+ Weeks
Add to Wish List
RDL RU-UDA4 Stereo Audio Distribution Amplifier - 2x4 - RCA Jacks
Item# RU-UDA4
The RU-UDA4 is the optimum choice where connectorized, unbalanced line-level distribution is needed. This unit features two separate, isolated channels. The RU-UDA4 may be used in stereo applications, or as two individual monaural distribution amplifiers. The input signals are buffered through output line drivers, providing four separate line-level unbalanced outputs for each of the two inputs. The RU-UDA4 performance is tailored around industry standard -10 dBV input/output levels. Excellent...
Our Price: $244.98
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-XLR3F XLR 3-pin Female Jack on Decora Wall Plate with Rear Terminal Block
Item# D-XLR3F
RDL D-XLR3F is a XLR 3-pin Female Jack on Decora Wall Plate with Terminal Block connections on rear. Features: All-Steel Construction Compatible with Decorar-Style Mounting Accessories Rear Panel Connections on Terminal Block Customizable Front-Panel Text
Our Price: $21.96
Availability: In Stock
Add to Wish List
RDL ST-LCR1 Logic Controlled Relay - Momentary
Item# ST-LCR1
The RDL ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR1 provides momentary operation and is ideally suited where additional switching contacts are needed to be added to nearly any type of control signal. Required Power Supply RDL PS24V Sold Separately Features: Add Contacts to Any Control Signal Activation from Logic Circuits DPDT Switching Relay Open-Collector Switching Control from Switch, Button...
Our Price: $108.97
Availability: In Stock
Add to Wish List
RDL EZ-RA6 Rack Adapter for 6 Increments of 1/6 Rack Width
Item# EZ-RA6
RDL EZ-RA6 is a rack adapter for 6 increments of 1/6 rack width. it will mount to all EZ A/V Products and EZ Storage Drawers. The base plate slides out for easy product mounting. Occupies One RU in Standard 19" Rack. Features: Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19" Rack Specifications:
Our Price: $64.88
Availability: In Stock
Add to Wish List
RDL EZ-ADA4 1x4 Stereo Audio Distribution Amplifier
Item# EZ-ADA4
The EZ series offers unparalleled flexibility. Each unit is fully labeled on the front and rear for use either as a finished product or as a utility module. Installation of multiple products is quick and easy using the comprehensive range of EZ rack mounts, chassis, bezels, drawers and accessories. High quality full-size switches, long life controls, quality connectors, solid-state audio and video switching, gold plating and superior engineering combine to make EZ the best value in the industry....
Our Price: $193.95
Availability: In Stock
Add to Wish List
RDL DB-XLR2M Dual XLR 3-pin Male Jacks on Decora Wall Plate - Terminal block connections on rear
Item# RDL-DB-XLR2M
RDL DB-XLR2M Dual XLR 3-pin Male Jacks on Decora Wall Plate front and Terminal Block connections on rear. Features: All-Steel Construction Compatible with Decora-Style Mounting Accessories Rear Panel Connections on Terminal Block Customizable Front-Panel Text Specifications:
Our Price: $24.68
Availability: In Stock
Add to Wish List
RDL STA-1 Dual Balanced/Unbalanced Line Amplifier -12 to 20 dB Gain
Item# STA1
The RDL STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier. Hook up the STA-1 just like a pair of audio transformers with gain. True dc amplifiers produce unsurpassed audio clarity, high common-mode rejection, ultra-low distortion and low noise. The STA-1 is perfect for most line amplification, impedance or balanced/unbalanced...
Our Price: $211.96
Availability: In Stock
Add to Wish List
RDL STR-19A Stick-On Series 19in Racking System - 12 Modules
Item# STR-19
STR-19A provides for compact mounting of 12 STICK-ONs and provision for cable harnessing.
Our Price: $189.84
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL ST-SH2 Stereo Headphone Amplifier - Stick-On Series
Item# ST-SH2
The RDL ST-SH2 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. For fixed level installations not requiring user volume control, the ST-SH2 is wired to the audio source and to a headphone jack. Frequently, it is desirable to mount a volume knob by the headphone jack. The LEVEL ADJUST terminals (L) and (R) may be wired to the respective wipers of a stereo 10 kΩ potentiometer to provide volume adjustment. It is recommended...
Our Price: $180.15
Availability: In Stock
Add to Wish List
RDL ST-LCR2 Logic Controlled Relay - Latching
Item# ST-LCR2
The RDL ST‑LCR2 provides double‑pole, double‑throw dry switching contacts and LED indicator for relay closure. The ST‑LCR2 is used where momentary pulses must alternately toggle on/off switching contacts. Open‑collector slave output allows connection of remote on indicator or an ST‑LCR1 for additional relay contacts. Features: Alternate‑Action Switching Add Contacts to Any Control Signal Activation from Logic Circuits DPDT Switching Relay Open‑Collector...
Our Price: $156.57
Availability: In Stock
Add to Wish List
RDL RU-RA3R 19 Inch Rack Adapter for 3 Rack-Up Modules
Item# RDL-RU-RA3R
The RU-RA3R rack mounts 3 RACK-UP modules in fixed or mobile installations. Metal RACK-UP series products drop into the chassis, slide into position and are secured by tightening two screws provided with the RACK-UP product or accessory.
Our Price: $78.12
Availability: In Stock
Add to Wish List
RDL DB-XLR3M XLR 3-pin Male Jack on Decora Wall Plate with Terminal Blocks
Item# RDL-DB-XLR3M
RDL DB-XLR3M XLR 3-pin Male Jack on Decora Wall Plate with terminal block conectors on rear. Features: Specifications:
Our Price: $21.96
Availability: In Stock
Add to Wish List
RDL TX-TPR1A Active Single-Pair Receiver - Twisted Pair Format-A - Bal Line Out
Item# TX-TPR1A
The RDL TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio-quality buffer amplifier feeds the outputs at the correct operating...
Our Price: $179.80
Availability: In Stock
Add to Wish List
Radio Design Labs D-J3M Mic/Line Input Assembly - XLR - Mini Jack - Terminal Block
Item# RDL-D-J3M
The D SERIES-J1, -J2 and -J3 are audio input accessories from Radio Design Labs offered in Decora® plates. The D SERIES panels are finished in RDL's grey/white, black or in stainless steel. These input panels are intended for installations demanding the ultimate in professional styling combined with durability, longevity and value. The D SERIES-J1, -J2 and -J3 fit directly into RDL back boxes (WB-1U, WB-2U) to fit cabinets, US or international walls. The back of each panel assembly is...
Our Price: $70.66
Availability: In Stock
Add to Wish List
RDL EZ-FP1 1/6 Rack Width Filler Panel for EZ-RA6 or EZ-CC6
Item# EZ-FP1
The EZ series offers unparalleled flexibility. Each unit is fully labeled on the front and rear for use either as a finished product or as a utility module. Installation of multiple products is quick and easy using the comprehensive range of EZ rack mounts, chassis, bezels, drawers and accessories. High quality full-size switches, long life controls, quality connectors, solid-state audio and video switching, gold plating and superior engineering combine to make EZ the best value in the industry....
Our Price: $11.63
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL TX-LC2 Unbalanced to Balanced Line Combiner
Item# TX-LC2
The RDL TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio line. The input circuits are high-impedance, line-level (-10 dBV) and are each isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. The output from the TX-LC2 is a mono mix of the stereo signal. Gain of the combined signals is adjustable...
Our Price: $138.67
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL TX-AT1 Audio Isolation Transformer - 600 Ohm 1:1
Item# TX-AT1
The TX-AT1 is part of the group of versatile Max-TX series products from Radio Design Labs. Max-TX modules are the large format members of the RDL TX family, featuring the superior engineering and components common to RDL products. The durable adhesives provided with the TX-AT1 permit permanent or removable mounting. The TX-AT1 may be rack or surface mounted with optional TX series accessories. The TX-AT1 is the ideal choice in many applications requiring studio quality transformer coupling between...
Our Price: $126.53
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL AV-HK1X HUM KILLER Audio Isolation Transformer XLR Input/Output
Item# AV-HK1X
The AV-HK1X is a mono transformer isolation module for use with a balanced, low impedance source and either a low or high impedance load. Input and output connections are provided on XLR jacks with gold-plated contacts. The shield (pin 1) connection of the INPUT jack is electrically isolated from the case and from the output ground (pin 1) at audio frequencies. The ground (pin 1) connection of the OUTPUT jack is connected to the case shield. The user audio source, such as a mixer, preamplifier...
Our Price: $139.37
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL ST-MPA24 Dual Microphone Phantom Adapter - 24 V Adjustable
Item# RDL-ST-MPA24
The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals. Therefore, the ST-MPA24 can convert any existing mic input into a phantom powered input.Module operation is from a 24 Vdc ground referenced power supply....
Our Price: $129.34
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL TX-70A 25V/ 70V/ 100V Speaker Level Input Interface - Unbalanced Line Output
Item# TX-70A
Do you ever need to feed the audio from a 70V distributed loud speaker system into a line-level device in a remote location? Do you ever need a few more loudspeakers than your existing 70V amplifier can drive but have no convenient line-level audio to run into a local amplifier? Well RDL has the module for you! The TX-70A 70/25/100 volt input interface matches a 100, 70 or 25 volt speaker line to any unbalanced line level audio input. Simply install the TX-70A as you would a 70V speaker...
Our Price: $55.37
Availability: In Stock
Add to Wish List
RDL TX-1A Balanced to Unbalanced Transformer - Adjustable
Item# TX-1A
The RDL TX-1A is used primarily for galvanic isolation and format conversion between equipment. Conversion from -10 dBV consumer level up to +4 dBu professional level requires voltage gain. The transformer in the TX-1A has a 1:1 ratio and uses an adjustable attenuator circuit at its output to lower the output signal to the level required. The module cannot provide voltage gain. RDL offers several premium quality conversion amplifiers to produce professional signals from consumer sources....
Our Price: $53.39
Availability: In Stock
Add to Wish List
RDL ST-PD5U Power Distributor - Switching - (PS-24V2/A)
Item# ST-PD5U
The ST-PD5U is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to five modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected. Upon application of power, the ST-PD5U ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the...
Our Price: $112.95
Availability: In Stock
Add to Wish List
RDL DS-BNC/D Insulated Double BNC Jack on Decora Wall Plate - Stainless steel
Item# RDL-DS-BNC-D
RDL DS-BNC/D Insulated Double BNC Jack on Decora Wall Plate - Stainless steel Features: Specifications:
Our Price: $34.30
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL HR-FP1 Half-Rack Filler Panel
Item# HR-FP1
The HR-FP1 is a filler panel that occupies one product space in RDL HALF-RACK mounting chassis, such as the HR-RA2. The design of the HR-FP1 complements the appearance of adjacent HALF-RACK products.
Our Price: $36.82
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-D2 Double plate for standard and specialty connectors
Item# RDL-D-D2
Double plate for standard and specialty connectors Features: Specifications:
Our Price: $23.59
Availability: In Stock
Add to Wish List
Radio Design Labs DB-J3M Mic/Line Input Assembly - XLR - Mini Jack - Terminal Block - Black
Item# RDL-DB-J3M
The D SERIES-J1, -J2 and -J3 are audio input accessories from Radio Design Labs offered in Decora® plates. The D SERIES panels are finished in RDL's grey/white, black or in stainless steel. These input panels are intended for installations demanding the ultimate in professional styling combined with durability, longevity and value. The D SERIES-J1, -J2 and -J3 fit directly into RDL back boxes (WB-1U, WB-2U) to fit cabinets, US or international walls. The back of each panel assembly is...
Our Price: $70.66
Availability: In Stock
Add to Wish List
RDL DTB STICK-ON Series Detachable Terminal Block
Item# DTB
Use DTB's to Quickly Detach and Reattach Wiring Harness to RDL Stick-Ons.
Our Price: $8.47
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL AMS-PB1 Momentary SPDT Pushbutton - fits all AMS mounts
Item# AMS-PB1
AMS is an accessory mounting system for jacks, indicators, switches and controls. The AMS-UF1 Universal Frame mounts directly into any RACK-UP mounting bay (see RACK-UP Mounting Accessories). The frame features four accessory bays and a tamper-resistant label strip the installer uses to identify each installed accessory. AMS accessories also mount in the RMS-4 Wall Panel and in the SR-4 Mounting Rack. Features: Specifications:
Our Price: $17.55
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL CP-2B Double Cover Plate -Black
Item# RDL-CP-2B
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes. Features: Specifications:
Our Price: $14.73
Availability: 2+ Weeks
Add to Wish List
RDL DS-XLR2M Dual XLR 3-pin Male Jacks on Decora Wall Plate with Terminal Block connections on rear
Item# RDL-DS-XLR2M
RDL DS-XLR2M Dual XLR 3-pin Male Jacks on Decora Wall Plate with Terminal Block connections on rear. Features: Specifications:
Our Price: $28.46
Availability: In Stock
Add to Wish List
RDL ST-RRB1 Rear Rack Rail Mounting Kit for any Stick-On Module
Item# RDL-STRRB1
The ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed. Features: Mounts in the back of a rack Mounts to any flat surface
Our Price: $27.76
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL DS-1/4F 1/4 Headphone Jack on Decora Wall Plate - Stainless steel
Item# RDL-DS-1-4F
RDL DS-1/4F 1/4 Headphone Jack on Decora Wall Plate - Stainless steel Features: Specifications:
Our Price: $18.98
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL DRA-35T TX Series DIN Rail Adapter
Item# DRA-35T
The DRA-35T provides mounting for any RDLr TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
Our Price: $11.67
Availability: 2+ Weeks
Add to Wish List
RDL DR35-1M DIN Rail - 35 Millimeter x 1 Meter
Item# DR35-1M
The Radio Design Labs DR35-1M is a DIN Rail that is 35 mm x 1 m. It's designed to work with DIN Rail adapters for mounting RDL products and power supplies. Features: Specifications: Dimensions: 35 mm x 1 m Package Type: Tube Package Dimensions: 2 x 39.5 x 0.25 in. Shipping Weight: 0.317 lbs.

Our Price: $9.38
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL EC-6 AC Power Extension Cord (6 pack) - North American - 6 Inch
Item# EC-6
AC Power Extension Cord (6 pack) - North American - 6 Inch Features: Kit of 6 cords, Length = 6 in. 15.25 cm (North America, UL/CSA) Specifications:
Our Price: $35.12
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL FP-DCC1 12 Vdc to 24 Vdc Converter
Item# FP-DCC1
The FP-DCC1 is the ideal choice in many applications where audio or video modules need to be powered from a 12 Vdc source. Ground-referenced RDL modules may be operated from one of the FP-DCC1's two outputs. One is a high current output providing 400 mA @ 24 Vdc intended to power multiple modules (see RDL ST-PD5 Power Supply Distributor for multiple module installations) or RDL audio power amplifiers (such as ST-PA2 or ST-PA6). A second low noise output is heavily...
Our Price: $293.64
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL FP-PSB1A Desktop Power Supply Mounting Bracket
Item# FP-PSB1A
The FP-PSB1A mounts one desktop style power supply and it includes a provision to mount other modules. Any RDL FP-PA20 type audio power amplifier can mount directly to the FP-PSB1A. RDL offers mounting brackets for mounting other RDL modules in place of the FP-PA20. The FP-PSB1A mounts to any flat surface or in an RDL FLAT-PAK series rack mount panel (FP-RRA or FP-RRAH). The design of the FP-PSB1A allows it to slide into the FLAT-PAK rack mount track. Mounting the FP-PA20 power amplifier (or...
Our Price: $49.38
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL PS-24KS North American Power Supply 24 Vdc 1000 mA
Item# PS-24K
The RDL PS-24KS is a 24 Vdc Switching Power Supply with a North American AC Plug. Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 1 A (UL, CSA) Dimensions: 1.80 in. (4.6 cm) x 3.51 in. (8.9 cm) x 1.55 in. (3.9 cm), nominal Efficiency: ENERGY STAR Level IV
Our Price: $42.02
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL PS-24KX European Switching Power Supply
Item# PS-24KX
RDL PS-24KX is a 24Vdc switching power supply with an interchangeable AC Plug and 1 A, dc Plug. Features: Input:100 to 240 VAC Output: 24 Vdc, 1 A (UL, CSA) Dimensions: 1.80 in. (4.6 cm) x 3.67 in. (9.3 cm) x 1.41 in. (3.6 cm), nominal Efficiency: ENERGY STAR Level V.
Our Price: $42.02
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL EZ-PD3 Power Supply Distributor
Item# RDL-EZ-PD3
The EZ-PD3 is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to three EZ modules from a single power supply. Upon application of power, the EZ-PD3 ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the load. A front-panel power switch is provided. The front-panel blue LED remains illuminated when the outputs are active. Features: Distribution of 24 Vdc Power Soft-Start...
Our Price: $135.66
Availability: Usually Ships in 5-14 Days
Add to Wish List
Radio Design Labls PS-24AX 24 VDC 500 mA Switching Power Supply - US Plug Style
Item# RDL-PS-24AX-US
4 Models Available
The Radio Design Labs PS-24AX-UK is a 24VDC switching power supply with interchangeable AC plug and 500mA DC plug. US plug style. Specifications: Input: 100 to 240 VAC. Output: 24 Vdc, 500 mA (UL, CSA). Dimensions: 1.80 in. (4.6 cm) x 2.76 in. (7 cm) x 1.37 in. (3.8 cm), nominal. Efficiency: ENERGY STAR Level IV.
Read More
Our Price: $32.49
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL PS-24V3 Universal Switching Power Supply
Item# RDL-PS-24V3
The PS-24V3 is a 24 VDC switching power supply with 3 amp DC plug. Please Note: This power supply does not include a cord. Features: 24 VDC Switching Power Supply No Cord Energy Star Level VI DC Plug for Quick Connection to Numerous RDL Modules DC Plug May be Cut Off for Hard Wiring to RDL Modules Compatible with Associated RDL PS Mounting Accessories Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 3 A (UL, CSA) Dimensions: 2 in. x 1.33 in. x 4.75...
Our Price: $109.43
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL PS-24V3A/24 24 Vdc Switching Power Supply with North American cord 3 A dc Plug (Replaces PS-24V2A)
Item# RDL-PS-24V3A-24
The RDL PS-24V3A-24 is a 24VDC switching power supply with a North American cord, 3A, and DC plug. Features: 24 Vdc Switching Power Supply North American Cord Energy Star Level VI DC Plug for Quick Connection to Numerous RDL Modules dc Plug May be Cut Off for Hard Wiring to RDL Modules Compatible with Associated RDL PS Mounting Accessories Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 3 A (UL, CSA) Dimensions (Nominal):...
Our Price: $116.39
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL RU-TP4PW Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through
Item# RDL-RU-TP4PW
The RU-TP4PW is a four output power inserter compatible with RDL twisted pair products. The RU-TP4PW is powered from a 24 Vdc power supply using either the power jack or the detachable terminal block. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers. Power is provided to all modules connected to the RJ45 jacks. Signal pairs feed through the associated RJ45s. The voltage feeding each dual-RJ45 jack set is separately protected by an automatically resetting...
Our Price: $160.07
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL TX-TP4PW Power Inserter / Signal Breakout - Twisted Pair Format-A - 4 Outputs
Item# RDL-TX-TP4PW
The TX-TP4PW is a power inserter compatible with RDL twisted pair products. The TX-TP4PW is powered from a 24 Vdc power supply using a dc power jack. Four RJ45 jacks are provided to connect remote twisted pair senders and receivers. The audio signals on pairs A, B and C are connected between all four RJ45 connectors. When one RJ45 receives signals from twisted pair senders, the remaining three RJ45 jacks can each connect to a separate twisted pair receiver. Three jacks are provided so that three...
Our Price: $108.01
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL TX-PD8X Switching Power Supply Distributor
Item# RDL-TX-PD8X
The TX-PD8X is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to eight modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected. Upon application of power, the TX-PD8X ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the...
Our Price: $161.07
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL RU-SQ6A Sequencing Controller - Power Up / Power Down
Item# RU-SQ6A
The RU-SQ6A is the ideal choice in installations where sequential ON and sequential OFF functions are desired. Control and output connections are made on the rear panel through clearly identified detachable terminal blocks. Two types of outputs are provided for each of the 6 sequential steps. One type is an open collector capable of switching loads of 50mA. The other type is an SPST dry contact closure which may be used to control a variety of equipment. A single-turn front-panel TIMING INTERVAL...
Our Price: $376.47
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL WH1 Warthog Power Supply Adapter - Surface mount
Item# WH1
The WH1 allows the mounting of up to six power supplies together in one location.Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets detachable mounting tabs, 6 cable ties to secure supplies. Features: Specifications: Dimensions: Height: 19.0 in. 48.30 cm; Depth: 1.72 in. 4.50 cm; Width: 7.00 in. 17.80 cm Package Type: Cardboard Box Package Dimensions: 20.5 x 6.75 x 2.25 in. Shipping Weight: 1.065 lbs.
Our Price: $68.70
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL WH2 Warthog 19 Inch Power Supply Adapter - Rackmount
Item# WH2
The WH2 4 RU Panel mounts to rear rack rails to provide the same power supply mounting convenience as the WH1. Features: Specifications:
Our Price: $68.70
Availability: Usually Ships in 5-14 Days
Add to Wish List
Radio Design Labs D-MJPT Mini-Jack Pass-Through Plate
Item# RDL-D-MJPT
The D-MJPT is a Decora style wall plate with a mini-jack (3.5 mm, 1/8") input or output connector. The front-panel jack is directly connected to a second mini-jack on the rear of the D-MJPT. The panel is ideal for mounting in a wall or in an RDL DC-1 Decora style countertop chassis. The mini-jack pass-through allows quick installation to provide user audio connections between the jack plate and a computer or other audio product that connects through a mini-jack. The D-MJPT is finished in RDL standard...
Our Price: $40.65
Availability: In Stock
Add to Wish List
RDL D-TPR1A Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output
Item# RDL-D-TPR1A
The D SERIES-TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The -TPR1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR1A features a white front-panel laminate with gray lettering that matches RDL DecoraÂ©-style remote controls. The DB-TPR1A features a black front-panel...
Our Price: $227.53
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPR2A Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs
Item# RDL-D-TPR2A
The D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR2A features a white front-panel laminate with gray lettering that matches RDL DecoraÂ©-style remote controls. The DB-TPR2A features a black front-panel...
Our Price: $237.12
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPR3A Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs
Item# RDL-D-TPR3A
The D SERIES-TPR3A modules are three-pair audio receiving modules compatible with RDLÂ® Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The -TPR3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPR3A features a white front-panel laminate with gray lettering that matches RDL DecoraÂ©-style remote controls. The DB-TPR3A features a black...
Our Price: $252.36
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPS1A Active Single-Pair Sender - Twisted Pair Format-A - XLR w/ Phantom
Item# RDL-D-TPS1A
The -TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS1A features a white front-panel laminate with gray lettering that matches RDL Decora-style remote controls. The DS-TPS1A is constructed of stainless steel...
Our Price: $226.50
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPS2A Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs
Item# RDL-D-TPS2A
The D SERIES-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2A features a white front-panel laminate with gray lettering that matches RDL DecoraÂ©-style remote controls. The DB-TPS2A features a black front-panel...
Our Price: $216.23
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPS2AM Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone and Stereo Mini Jack
Item# RDL-D-TPS2AM
The D SERIES-TPS2AM modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS2AM models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2AM features a white front-panel laminate with gray lettering that matches RDL Decora®-style remote controls. The DB-TPS2AM features a black...
Our Price: $216.23
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPS3A Active Three-Pair Sender - Twisted Pair Format-A - XLR Mic & Stereo Phono In
Item# RDL-D-TPS3A
The D SERIES-TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS3A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS3A features a white front-panel laminate with gray lettering that matches RDL Decorac-style remote controls. The DB-TPS3A features a black front-panel...
Our Price: $229.14
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPS6A Passive Single-Pair Sender
Item# RDL-D-TPS6A
The -TPS6A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features two gold plated phono jacks intended for stereo consumer line level audio sources. A studio-quality transformer provides isolation between the audio source and the RJ45 TP CABLE.The -TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE...
Our Price: $103.02
Availability: 2+ Weeks
Add to Wish List
RDL D-TPS7A Passive Single-Pair Sender
Item# RDL-D-TPS7A
The -TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer provides isolation between the audio source and the RJ45 TP CABLE.The -TPS7A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE...
Our Price: $103.02
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPS8A Active Two-Pair Sender - Twisted Pair Format-A - Mini jack input
Item# RDL-D-TPS8A
The D SERIES-TPS8A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS8A features a white front-panel laminate with gray lettering that matches RDL Decora®-style remote controls. The DS-TPS8A is constructed of stainless...
Our Price: $196.00
Availability: 2+ Weeks
Add to Wish List
RDL D-TPSL1A Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In
Item# RDL-D-TPSL1A
The -TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPSL1A modules feature a stereo line input through a mini jack or two RCA phono jacks summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. These modules drive only one cable pair, therefore they accept signals...
Our Price: $225.78
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPSL2A Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In
Item# RDL-D-TPSL2A
The -TPSL2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.The -TPSL2A modules feature an XLR microphone input and two RCA phono jack inputs summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic...
Our Price: $229.15
Availability: Usually Ships in 5-14 Days
Add to Wish List
RDL D-TPSM2A Active Two-Pair Sender - Dual Microphone Preamplifier - Twisted Pair Format-A - White
Item# RDL-D-TPSM2A
The D SERIES-TPSM2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The TPSM2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPSM2A features a white front-panel laminate with gray lettering that matches RDL Decorac-style remote controls. The DB-TPSM2A features a black front-panel...
Our Price: $332.96
Availability: Usually Ships in 5-14 Days
Add to Wish List

The concept of Application-Specific-Modules was first introduced by RDL more than twenty years ago - a concept promoting unsurpassed value and performance. As the inventor of Application-Specific-Modules, RDL continues to lead the industry with their solutions to specific problems as well as building blocks of quality audio/video system designs. Markertek is the largest in-stock source for Radio Design Labs Products.

Markertek is an authorized dealer for the entire Radio Design Labs line. If you don't see what you're looking for, contact us and we'll do our best to get it for you.

Sign In

Radio Design Labs

Narrow Products

By Category

By Price Range

Filter By