Appsys Pro Audio

A Flexiverter is an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available. Format combinations provide the most common conversions with improved features and unique pairings (e. g. AES50 Dante, Dante Dante SRC, Dante AVB). The Flexlink Connection The FlexLink connection is designed to connect two Flexiverters, or one Flexiverter...

The Appsys Pro Audio MTA-64 small Extender inline box enables the Multiverter to connect directly to DiGiCo and Soundcraft/Studer MADI-TP ports. On the Multiverter side, audio is connected to the MADI-TP port, while power and configuration is taken from the Extension port (which is still available because it´s fed thru). Supported are all known pin-outs as well as an built-in MDIX feature which allows you to use straight Cat5 cables where normally crossover cables were required. With the...

The Flexiverter AUX-MADI COAX is a 64 x 64 channel MADI for coaxial cable (BNC connectors) for the Flexiverter Main Unit (Required). Features: Specifications:

The Flexiverter AUX-MADI OPTO is a 64 x 64 ch. MADI optical, SC (Multimode 125um 1310 nm) for the Flexiverter Main Unit.(Required) Features: Specifications:

The Appsys MVR-MKII multiverter is a versatile digital audio bridge, capable of translating between many digital audio formats. The device features matrixstyle any-to-any conversion with unmatched flexibility, including arbitrary channel-wise routing between all interfaces. The integrated headphone preamp allows you to monitor any incoming signal, while the integrated test tone generator helps you troubleshooting even the most complex setups. Twelve preset memories let you store or recall...