metaSETZ

The TL-2 v2.0 tally light is a streamlined and compact unit that can be mounted on your camera to provide both a bright tally for your on camera talent and status indicator lights for your camera operator. It connects to any of our tally controllers using standard Ethernet style cable and includes a new, more robust mounting system. The TL-2-C is for use with any metaSETZ tally controller. Features: 3 Status LEDs: Red - Program, Green - Preview (TC300 or with TLC-6),Yellow - Effects (w/TLC-6...

The TLC-8S is designed to work with eight input HD TriCasters. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-8S supports both program and preview tally and the eight tally ports can be software assigned to any switcher input. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper...

Compatible with any video switcher that has contact closure or open collector tally outputs. Available in four different input connector variants: DB9, DB15, DB25 and DB37. Internal configuration matrix so in most cases no custom cable is necessary. Supports both program and preview tally (depends on switcher) metaSETZ exclusive intercom pass through. Compatible with metaSETZ TL-1, TL-XD and TL-2 tally lights. Includes DB Cable and USB power cube. Preliminary Compatibility List: DB25: Blackmagic...

Connect the TLC-8 Controller to CCUs that require a contact closure input for tally. The RU-2 connects just like one of our tally lights but rather than LEDs has two contact closure outputs (on a 3.5mm jack). The RU-2 includes a twelve inch RJ-45 cable to connect to the controller and a two and a half foot pigtail with a right angle 3.5mm connector at one end and bare tinned leads at the other. Simply add a connector that matches your CCU's tally port.

Compatible with any video switcher that has contact closure or open collector tally outputs. Available in four different input connector variants: DB9, DB15, DB25 and DB37. Internal configuration matrix so in most cases no custom cable is necessary. Supports both program and preview tally (depends on switcher) metaSETZ exclusive intercom pass through. Compatible with metaSETZ TL-2 tally lights. Includes DB Cable and USB power cube. Partial Compatibility List: DB15:...

The TLC-4LS is designed to work with four input Livestream Studio switchers. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-4LS supports both program and preview tally. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper adapters) and save a cable run. Features: Six tally outputs Intercom...

The TLC-4S is designed to work with four input HD TriCasters. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-4S supports both program and preview tally and the six tally ports can be software assigned to any switcher input. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper adapters)...

The TLC-8d controller is an adapter box the connects to the TriCaster TCXD850's 15 pin tally port and interfaces to either model of our tally lights. The '850's tally port supports a 'program' tally for the source selected on the program bus of the switcher. The TLC-8d translates this signal to illuminate the red camera operator tally and the 'talent' tally on the TL-2 tally light. The talent tallys can be globally disabled via a jumper in the TLC-8d. For CCU users the TLC-8d has wet contact...

The TLC-8LS is designed to work with eight input Livestream Studios. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-8LS supports both program and preview tally. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper adapters) and save a cable run. Features: Eight tally outputs Intercom...

In the past the hard part of setting up a tally system for your switcher was interfacing the hardware. The second issue is if you don’t have cameras with built in tally lights and matching CCUs you were out of luck. metaSETZ has solved these problems with the TLC-U Universal Tally Controller and TL-2 Tally Lights. The TLC-U is available with four different connector configurations to match almost any switcher’s tally port and has an internal configuration matrix so no custom cables...