Where to Buy Palmer Audio | Audio DAs, Cable Testers

Viewing Item(s):

Display

Show As

Palmer Audio PLI04 Media DI Box 2 Channel for PC and Laptop
Item# PLM-PLI04
PRO MEDIA DI/ PLI-04. With the new PRO MEDIA DI/ PLI-04, Palmer introduces a DI-box, produced with the discerning needs of the computer-age media in mind. Using this uncomplicated method, personal computers and other consumer equipment with unbalanced outputs can be converted to balanced, in order to carry out, e.g., a presentation over a professional PA system. The PLI-04 accommodates all the common input types, TRS jacks accepting mono or stereo plugs, RCA phono sockets and a 3.5mm stereo jack...
Our Price: $199.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAN01 DI Box passive
Item# PLM-PAN01
Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Features: Passive DI Box + Thru Output + Attenuable Input Sensitivity Specifications: Product type: DI box Type: passive Channels: 1 Inputs: 2 input connectors: 6.3 mm Jack max. input level: + 62 dBu input impedance: 68 k Ohm(s) input pad: 0 / -30 dB Outputs: 1 THRU outputs/channel: 1 output connectors: XLR, 6.3 mm Jack max....
Our Price: $69.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAN02 DI Box active
Item# PLM-PAN02
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73...
Our Price: $89.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAN03 19 Inch DI Box 4-channel active
Item# PLM-PAN03
Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to...
Our Price: $379.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAN03PASS 19 Inch DI Box 4-channel passive
Item# PLM-PAN03PASS
Passive 4-channel DI BOX in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB) permits connection of a line or speaker signal at the user's choice. The specifications are identical with those of the PAN 01. All connections and switches are on the 1 U front panel; the XLR output is additionally present as a parallel socket on the rear panel. Features: 4 channel Passive DI Box + 19" Rack Mount Chassis + Front panel access...
Our Price: $229.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAN04 DI Box 2-channel passive
Item# PLM-PAN04
The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Features: 2 Channel Passive DI Box + Jack input with parallel THRU + Can handle line and speaker level signals...
Our Price: $99.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAN08 19 Inch DI/Line Isolation Box 4 channels active
Item# PLM-PAN08
The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear). The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of +12 dBu on a load of 600 Ohms with 0.05 %...
Our Price: $519.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio WIPPER Passive DI Box with Balancing and Impedance Matching
Item# PLM-PWIPPER
If you need to pick up the pure sound of your guitar, bass or keyboard, you need a high-quality DI-Box which does not alter the natural sound or add any noise. The Palmer wipper is a single channel passive DI box with a high-quality transformer, which also handles high levels without distorting or losing the pure sound of your instrument. With a ratio of 10:1, it can be used for optimal impedance and level adjustment to connect instrument signals from guitars, bass, keyboards or synthesisers...
Our Price: $99.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Palmer Audio TRAVE Passive Re-Amplification DI Box for Signal Routing from DAW or Mixer
Item# PLM-PTRAVE
Reamping is a valuable recording technique used by many sound engineers. It lets you experiment at leisure by running guitar, bass, keyboard, drum and even vocal tracks through amplifiers and effects pedals. As with many other techniques, you need the right tools. The Palmer trave is a passive reamping box that requires no external power supply. Inside is a specially developed transformer that converts the balanced line signal into an unbalanced Hi-Z signal with perfectly matched...
Our Price: $79.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Palmer Audio PAL-PBRIDGE4A 19-Inch 4 Channel Active DI Box - 9V DC Power Supply Included
Item# PLM-PALPBRIDGE4A
Are you aiming to capture the pure signal from a guitar, bass, or keyboard without any noise and tonal loss, even over long cable runs? In that case, you need a DI box - and a high-quality one at that - to ensure your sound won't be compromised. The Palmer Audio BRIDGE 4A from Palmer is a 4-channel, active DI box in 19" rack format for feeding the unbalanced and high-impedance signals of electric instruments such as guitar, bass, keyboard or synthesizer into the microphone inputs...
Our Price: $439.99
Availability: In Stock
Add to Wish List
Palmer Audio PAL-PBRIDGE4P 19-Inch 4 Channel Passive DI Box
Item# PLM-PALPBRIDGE4P
Are you aiming to capture the pure signal from a guitar, bass, or keyboard without any noise and tonal loss, even over long cable runs? In that case, you need a DI box - and a high-quality one at that - to ensure your sound won't be compromised. The Palmer Audio BRIDGE 4P is a 4-channel passive DI box in 19" rack format with high-quality transformers that handle even high levels without distorting or losing the pure sound of your instrument. Each channel is equipped with a 1/4"...
Our Price: $299.99
Availability: Usually Ships in 5-14 Days
Add to Wish List
Palmer Audio PAL-PBRIDGE4APLUS 19-Inch 4 Channel Active DI Box/Isolation Box - 9V DC Power Supply Included
Item# PLM-PBRIDGE4PLUS
The Palmer Audio BRIDGE 4A+ is a multifunctional device: each of the four channels can be used independently as an active DI box, a line isolation box, or a booster. The input combo socket accepts unbalanced and balanced signals. The outputs are designed as two transformer-balanced XLR sockets per channel (one on the front and one on the rear). The galvanic isolation via transformer eliminates hum loops, and the ground lift switch can also be used to eliminate noise and interference...
Our Price: $519.99
Availability: Usually Ships in 5-14 Days
Add to Wish List

Palmer Audio

By Category

By Price Range

Filter By

Narrow Products

By Category

By Price Range

Filter By

Palmer Audio PLI04 Media DI Box 2 Channel for PC and Laptop

Palmer Audio PAN01 DI Box passive

Palmer Audio PAN02 DI Box active

Palmer Audio PAN03 19 Inch DI Box 4-channel active

Palmer Audio PAN03PASS 19 Inch DI Box 4-channel passive

Palmer Audio PAN04 DI Box 2-channel passive

Palmer Audio PAN08 19 Inch DI/Line Isolation Box 4 channels active

Palmer Audio WIPPER Passive DI Box with Balancing and Impedance Matching

Palmer Audio TRAVE Passive Re-Amplification DI Box for Signal Routing from DAW or Mixer

Palmer Audio PAL-PBRIDGE4A 19-Inch 4 Channel Active DI Box - 9V DC Power Supply Included

Palmer Audio PAL-PBRIDGE4P 19-Inch 4 Channel Passive DI Box

Palmer Audio PAL-PBRIDGE4APLUS 19-Inch 4 Channel Active DI Box/Isolation Box - 9V DC Power Supply Included

Sign In

Palmer Audio

Narrow Products

By Category

By Price Range

Filter By