Wooden Camera

The Wooden Camera 283000 Battery Slide Pro V-Mount (Sony FX6) utilizes a WC Pro V-Mount plate which converts battery voltage to 19.5V for the camera, FX6 barrel connector, and a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows the Sony BPU series battery to be installed, giving the user the ability to hot swap V-Mount batteries. To adjust battery plate position, loosen the thumbscrew and slide....

Rig up your Sony VENICE, F55, or F5 with this Solid Baseplate from Wooden Camera. Featuring an ARRI-standard rosette on each side, as well as 15mm LWS openings for pass-through rods, this fixed baseplate makes it easy to add accessories such as a lens support, follow focus, or matte box to your setup. There are two rod clamps on each side, so if you prefer you can use two sets of rods, one in the front and one in the back. The Solid Baseplate brings the camera up to the correct lens height when...

Wooden Camera 280200 Battery Slide Pro Gold Mount (RED® KOMODO™) attaches to the camera-left, BP-9 battery slot and powers the camera using a right angle LEMO compatible connector. Thumbscrew can be loosened to tilt and slide the plate as needed. Three D-Taps on the plate provide battery voltage for accessories and power is monitored for over-current. If more than 5.8A are used by accessories, a digital fuse will trip and the red LED will illuminate but the camera will remain...

The Wooden Camera 282300 Battery Slide Pro (Canon C300mkIII, C400, C500mkII) utilizes a WC Pro Gold Mount or V-Mount plate and provides battery voltage to the camera through a 4pin XLR connector. It features a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap batteries. To adjust battery plate position,...