Where to Buy Custom Audio Video & Fiber Rack Panels

Viewing Item(s):

Display

Show As

6-Camera SMPTE Hybrid & Robotic Control Black Anodized 13x13.25 Custom Panel with Laser Engraving
Markertek In-House Custom Shop
Item# CMP-M2583866LE
Custom built 13 x 13.25 black anodized panel for 6 SMPTE Hybrid Fiber cameras with full monitoring and IP networking. Panel is fully engraved with callouts. Features: 6 LEMO SMPTE Hybrid Panel Mounts (CP1 to CP6) 5-Pin XLR Tally Lines Laser Engraved Labeling RJ45 Feed Through for Network and RS-232/422 Robotic Controls IP Network Section for Audio & Video

Availability: Usually Ships in 5-14 Days
Item Details
7RU Custom Truck I/O Panel C4H with Triax / DT12 Audio Breakouts / 24-Channel ST Fiber
Markertek In-House Custom Shop
Item# CMP-M2878564-1
A custom truck panel designed with two Kings Triax bulkheads, Dual DT12 37-Pin Audio patch points broken out to individual XLR I/O channels, 24-Channels of ST Fiber, dual ethernet RJ45 jacks and three 3G-SDI BNC video feeds. This 7RU panel is fully engraved for fast patch-point identification. Features: 7RU Black Anodized Panel Dual Kings Triax Video Bulkheads Male and Female DT12 37-Pin Chassis Mounts XLR Male and Female I/O for DT12 Channel Breakouts 3G-SDI Video Feeds Press Feeds and RJ45...

Availability: Usually Ships in 5-14 Days
Item Details
2RU IO Custom Panel - Hoovision Klockner Stadium
Markertek In-House Custom Shop
Item# CXP-M2767477-2
Customer designed custom panel for the University of Virginia's Hoovision production team. Panel features a single Neutrik opticalCON DUO Fiber feed-through along with a complete set of XLR channels for Intercom Communication and BNC video feeds. Features: 2RU Enraved Custom Rack Panel 1x Neutrik opticalCON DUO Fiber Optic Feed-Through 8x 3G-SDI BNC Feed-Through 13x 3-Pin Male XLR Channels 7x 3-Pin Female XLR Channels

Availability: Usually Ships in 5-14 Days
Item Details
Hinged 8x8 Custom Truck I/O Panel with Stainless Steel Latches
Markertek In-House Custom Shop
Item# CMP-M2848321
This 8x8 custom truck I/O panel features hinged rear panel access and stainless steel latches. We incorporated a single gang gem box with a front mounted IEC 15-Amp receptacle. The panel has 8 3G-SDI BNC feed-through connections, 2 HDMI feed-throughs and 4 3-Pin XLR audio I/O. Features: 8x8 Custom Truck I/O Panel Hinged for Rear Panel Access Stainless Steel Latches Single gang gem box with a front mounted IEC 15-Amp receptacle 8x 3G-SDI BNC Feed-Fhrough 2x HDMI Feed-Through 4x 3-Pin XLR...

Availability: Usually Ships in 5-14 Days
Item Details
Custom Metal Panel Laser Engraved for 6 Cameras - 8RU (19-Inch x 14-Inch)
Markertek In-House Custom Shop
Item# CMP-M2914082
Custom 8RU panel designed to interface 6 cameras. Fully punched and labeled for camera send, monitoring, sync, timecode, telepromter, network interface and tally.

Availability: Usually Ships in 5-14 Days
Item Details
Hinged and Air Cooled 6RU Custom Rack Panel
Markertek In-House Custom Shop
Item# CMP-M2282712LE
Frustrated because you need to get behind your rack panels with ease? Stay cool and don't come unhinged by calling our custom team! This custom built 6RU rack panel includes convenient hinged access to the rear panel and has a built in cooling fan. 47 panel mounted connectors in all including 3G-SDI BNC, HDMI, USB, XLR and Dual LC Fiber feed through connections. Fully labeled via laser engraving. BNC channels included multiviewer I/O and program IO and XLR channels for Time Code....

Availability: Usually Ships in 5-14 Days
Item Details
Custom 2RU Black Anodized Panel with PowerCON & Strain Relief - Dual PDU
Markertek In-House Custom Shop
Item# CMP-M3638857-1
A 2RU fully custom rack panel that covers a total of 22 AC power inputs and outputs utilizing Neutrik PowerCON connections. Among the highlights, the panel employs 8 NAC3FPX powerCON TRUE1 Top connectors which are fully IP65 and UV rated. It also has 8 NAC3MPB "Power Out" connections. It is complete with laser engraved callouts for all I/Os. We included a rear mounted LBP-1A-EA lacing bar to provide superior strain relief on all power cables. Features: 2RU Panel with Laser Engraved Legend 8x...

Availability: Usually Ships in 5-14 Days
Item Details
Custom opticalCON Fiber / Video / Intercom / DANTE/ Audio/ Control Panel Truck I/O Panel
Markertek In-House Custom Shop
Item# CMP-M2767763
19" x13" Custom truck panel built with Neutrik opticalCON Fiber ports, 3G-SDI BNC Video channels for router and program I/O, XLR Intercom and Mixer ports, DANTE/MADI ethernet jacks and RF I/O. Features: 3G-SDI BNC I/O Channels opticalCON Camera Ports Intercom A and B Channels XLR Mixer I/O DANTE / MADI Network Ports RF I/O

Availability: Usually Ships in 5-14 Days
Item Details
Custom 2RU AV Panel With RJ45/BNC Connectors - Black Anodized
Markertek In-House Custom Shop
Item# CMP-M3321369
This panel was designed for a major TV network to route feeds for its OTT streaming app. It is laser engraved to call out connections for integrated receiver/decoder uplink and downlink paths and includes redundant pathways for backup purposes. Features: 2RU Custom Punched and Engraved Black Anodized Panel 14x Neutrik 4K/8K BNC Panel Mount Feed-Thru Connections 4x Neutrik etherCON RJ45 IP Ports

Availability: Usually Ships in 5-14 Days
Item Details
Custom 2RU SHOW CONTROL Black Anodized Rack Panel Pre-Punched For Neutrik PowerCON & UV Printed
Markertek In-House Custom Shop
Item# CMP-M3704799-1UV
A custom UV printed panel with the customers logo that's punched with 11 Neutrik powerCON cutouts. Each cutout is laser engraved to identify each port on the panel.

Availability: Usually Ships in 5-14 Days
Item Details
Custom 4RU Hinged Panel with 80 12G-SDI BCJ-JRK BNC Feed Thru with Isolation Bushings
Markertek In-House Custom Shop
Item# CMP-M3642495
A hinged rack panel standing tall at 4RU high. This panel is fully loaded with 80 Canare 12G-SDI BCJ-JRK BNC feed thru jacks and each includes Isolation Bushings. The hinged front delivers easy access to the back of the panel whenever it's required. Features: Hinged 4RU Rack Panel 80 Canare 12G-SDI BCJ-JRK BNC Feed Thru Jacks

Availability: Usually Ships in 5-14 Days
Item Details
Custom 3RU Black Anodized Panel with Hinge - XLRM Midi CAT6 USB 5p XLR and True1 PowerCON to Wired Tails 30 Inch
Markertek In-House Custom Shop
Item# CMP-M3591211
This custom gem hosts a 3RU Hinged Rack Panel offering the best flexibility for swapping wiring or making changes inside a rack or gig rig. It features a host of 3-Pin XLR audio outputs - 12 in all - plus cutouts for Midi, USB and etherCON True 1 powering. To keep the panel lean, all connectors were rear mounted by customer request. Features: 3RU Hinged Rack Panel 1x NAC3PX-TOP TopCon Power Jack 12x NC3MDL Black and Gold 3-Pin XLR 2x USB-C Pass Through Jacks 4x RJ45 Pass Through Jacks 4x USB-A...

Availability: 2+ Weeks
Item Details
Custom 16-Inch x 12-Inch Black Anodized Panel with Wired Tail to 1/4in Female - 8 Inches
Markertek In-House Custom Shop
Item# CMP-M3701728
This gorgeous 16" x 12" Black Anodized panel was custom made for the Spanish Fork Community Network News Channel 17 studio. We worked closely with the customer to deliver a custom cut in the panel bottom to fit their needs. The panel is completely engraved to identify all I/O channels and includes 10 RJ45 network jacks, 10 SDI BNC Feed-thru jacks, 4 HDMI Feed-thrus. It has A/C power in and out, RS232 scorehub jacks and 4 channels each of XLR Feed-thrus for audio inputs and audio ouputs. The...

Availability: Usually Ships in 5-14 Days
Item Details
Custom 5 x 8 Inch D-Series Punch Rack Panel with Colored Tags - Black Anodized
Markertek In-House Custom Shop
Item# CMP-M3713243-01
This was a special build for a customer looking to create their own panel in a corner wall. The key to this panel was leaving room for expansion as their studio needs grew. The plan was centered around being able to add any kind of connector - whether it was video, audio or data - by sticking with a D-Puch style connector. It is a 5" x 8" Black Anodized panel is and features colored tags to make connector types quickly and easily identifiable. This panel also features Custom Engraved Color...

Availability: Usually Ships in 5-14 Days
Item Details

Custom Panels

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

6-Camera SMPTE Hybrid & Robotic Control Black Anodized 13x13.25 Custom Panel with Laser Engraving

7RU Custom Truck I/O Panel C4H with Triax / DT12 Audio Breakouts / 24-Channel ST Fiber

2RU IO Custom Panel - Hoovision Klockner Stadium

Hinged 8x8 Custom Truck I/O Panel with Stainless Steel Latches

Custom Metal Panel Laser Engraved for 6 Cameras - 8RU (19-Inch x 14-Inch)

Hinged and Air Cooled 6RU Custom Rack Panel

Custom 2RU Black Anodized Panel with PowerCON & Strain Relief - Dual PDU

Custom opticalCON Fiber / Video / Intercom / DANTE/ Audio/ Control Panel Truck I/O Panel

Custom 2RU AV Panel With RJ45/BNC Connectors - Black Anodized

Custom 2RU SHOW CONTROL Black Anodized Rack Panel Pre-Punched For Neutrik PowerCON & UV Printed

Custom 4RU Hinged Panel with 80 12G-SDI BCJ-JRK BNC Feed Thru with Isolation Bushings

Custom 3RU Black Anodized Panel with Hinge - XLRM Midi CAT6 USB 5p XLR and True1 PowerCON to Wired Tails 30 Inch

Custom 16-Inch x 12-Inch Black Anodized Panel with Wired Tail to 1/4in Female - 8 Inches

Custom 5 x 8 Inch D-Series Punch Rack Panel with Colored Tags - Black Anodized

Sign In

Custom Panels

Narrow Products

By Brand

By Price Range

Filter By