Ethernet Controllers

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

ADDERLink ASP-001-US Infinity Manager (AIM) Control Suite - Supports 24 End Points
Adder Corporation
Item# ADR-ASP-001-US
The ADDERLink™ ASP-001-US INFINITY Manager (AIM) server is a control suite which transforms ADDERLink INFINITY (ALIF) extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co- operative sharing of computers and multicasting of video to any destination. Secure access and communications Using TLS (transport layer security)...
Our Price: $4,203.00
Availability: In Stock
Add to Wish List
Dataprobe iPIO-8 8 Port Network I/O Controller
Dataprobe Inc.
Item# DTPB-IPIO-8
iPIO - Bidirectional Event Transport Dataprobe iPIO gives you the ability to transport digital I/O across Ethernet networks with IP protocols. Multiple iPIO devices can communicate amongst themselves to transport I/O information across your network, and links are bidirectional, so events in either location are reflected at any other site. Any changes in status appear at the other end of the network as relay outputs. 2 Units are required for End-to-End transport. The Dataprobe iPIO-8 offers...
Our Price: $439.00
Availability: In Stock
Add to Wish List
Dataprobe iPIO-16 16 Port Network I/O Controller / GPIO Manager
Dataprobe Inc.
Item# DTPB-IPIO-16
iPIO - Bidirectional Event Transport Dataprobe iPIO gives you the ability to transport digital I/O across Ethernet networks with IP protocols. Multiple iPIO devices can communicate amongst themselves to transport I/O information across your network, and links are bidirectional, so events in either location are reflected at any other site. Any changes in status appear at the other end of the network as relay outputs. 2 Units are required for End-to-End transport. The Dataprobe iPIO-16 offers...
Our Price: $625.00
Availability: In Stock
Add to Wish List
LYNX Technik RCT 1012 yellobrik Rack Controller
LYNX Technik Inc
Item# LNX-RCT-1012
The LYNX Technik RCT 1012 is a compact one slot yellobrik module designed to combine the control of up to 12 yellobrik modules to an ethernet port. It is a one-stop solution for the management and control of several yellobriks in an easy, fast, and efficient manner without requiring an individual connection to each module for setting parameters or updating the firmware. All connected yellobrik modules are visible on the network remotely. RCT 1012 automatically discovers the connected yellobrik...
Our Price: $684.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Skaarhoj INLINE-10-V1B Inline 10 w/Blue Pill Inside
SKAARHOJ
Item# SKA-INLINE10V1B
With Inline 10 you'll get the perfect modular controller to use alone or with our other small form factor controllers. The Inline 10 has a row of 6 awesome four-way buttons with RGB coloring, 4 encoder knobs, and 10 customizable graphical OLED displays for function legends. Skaarhoj designed the Inline10 with a number of devices in mind. A comprehensive list of "Blue Pill" supported devies and configurations can be found on the Skaarhoj website. Skaarhoj...
Our Price: $1,337.70
Availability: Usually Ships in 5-14 Days
Add to Wish List
Cobalt Digital WAVE CP-84L 2RU 84 LCD R/G/B Back-lit Button Control Panel with Monochrome LCD Graphics for WAVE Series
Cobalt Digital
Item# CB-WAVE-CP-84L
The Cobalt WAVE CONTROL SERIES CP-84L Remote Control Panel features 84 back-lit LCD dot matrix display buttons. All buttons are illuminated by Red, Green and Blue LED's providing a wide array of background colors to choose from. The frame is 2RU - 3.5 inch tall and is only 3.4 inches deep with removable rack mount "ears" for desktop use or other custom installations. The WAVE series of control panels offer unprecedented flexibility, ease of use & integration. Located on the rear of...
Our Price: $10,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Cobalt Digital Wave Control Series CP-78 Back-Lit Control Panel w/ 2 General Purpose Inputs & 2 General Purpose Outputs
Cobalt Digital
Item# CB-WAVE-CP-78
The Cobalt WAVE Remote Control Panel CP-78 features 78 back-lit buttons. All buttons are illuminated by Red, Green and Blue LED's providing a wide array of background colors to choose from. Factory presets provide a solid starting point from which to customize each button color. The front panel color LCD display keeps you informed of the panel status. The frame is 2RU / 3.5 inches tall and is only 3.4 inches deep with removable rack mount "ears" for desktop use or other custom installations. The...
Our Price: $1,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Kramer KN-30D-LIC Kramer Network Enterprise Management Platform License - Up to 30 Devices
Kramer
Item# KR-KN-30D-LIC
6 Options Available
Kramer Network is an enterprise management platform that lets IT and AV professionals easily deploy, configure and manage an entire Pro AV installation from anywhere in the network, including Dante™ and 3rd party devices. KN-30D-LIC is a network license that allows you to use this platform on up to 30 devices. Perfect for: Meeting rooms across multiple buildings Education, university classrooms and lecture halls Digital signage with multiple AV sources to multiple...
Read More
Our Price: $962.94
Availability: Software Download
Add to Wish List
Ross GPI-8941-I16 16 Input GPI I/O openGear Card
Ross Video
Item# GPI-8941-I16
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16 is a 16 Input GPI Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage sense...
Our Price: $1,500.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I16-R3 16 Input openGear General Purpose Interface Card GPI I/O with Rear Module
Ross Video
Item# GPI-8941-I16-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16-R3 is a 16 Input GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $1,900.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I32 32 Input GPI I/O openGear Card
Ross Video
Item# GPI-8941-I32
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I32 is a 32 Input GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage sense...
Our Price: $2,000.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I32-R3 32 Input openGear GPI I/O Card with Rear Module
Ross Video
Item# GPI-8941-I32-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I32-R3 is a 32 Input GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $2,400.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O16 16 Output openGear General Purpose Interface GPI I/O Card
Ross Video
Item# GPI-8941-O16
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O16 is a 16 Output GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage...
Our Price: $1,700.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O16-R3 16 Output openGear General Purpose Interface Card GPI I/O with Rear Module
Ross Video
Item# GPI-8941-O16-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O16-R3 is a 16 Output GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $2,100.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O32 32 Output GPI I/O openGear Card
Ross Video
Item# GPI-8941-O32
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O32 is a 32 Output GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage...
Our Price: $2,200.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O32-R3 32 Output GPI I/O Card with Rear Module
Ross Video
Item# GPI-8941-O32-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O32-R3 is a 32 Output GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $2,600.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I16-O16 openGear General Purpose Interface Card 16 Input / 16 Output GPI I/O
Ross Video
Item# GPI-8941I16O16
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16-O16 is a 16 Input / 16 Output GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense)...
Our Price: $2,100.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I16-O16-R3 16 Input / 16 Output openGear General Purpose Interface Card GPI I/O Card with Module
Ross Video
Item# GPI-8941I16O16R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16-O16-R3 is a 16 Input / 16 Output GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact...
Our Price: $2,500.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross NK Series NK-3RD Third Party Router Interface for NK Series using Pro Bel SW-P-08/Jupiter Esswtich/GVG-7000
Ross Video
Item# ROSS-NK-3RD
The Ross NK-3RD Third Party Router Interface enables a third-party control system to control an NK Series routing system using the Pro Bel SW-P-08 or the Grass Valley Jupiter ESswtich protocol. Using this protocol, an NK Series router can emulate a Probel router or interface to Grass Valley products via ESswitch (limited to crosspoint switching and crosspoint status / tally requests), allowing control of the NK Series router via a third-party automation system. Features: Enables third-party...
Our Price: $3,100.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ross NK Series NK-IPS Network Bridge IP Configuration Device for NK Series
Ross Video
Item# ROSS-NK-IPS
The Ross NK-IPS Network Bridge is the external gateway to all NK Series devices for configuration, firmware upgrades, monitoring and remote control. The NK-IPS provides an Ethernet port that connects to a LAN or directly to a computer. This port is used to communicate to a web browser or DashBoard Control System to configure and control the NK Series Routing System. NK-IPS is also equipped with a buffered 8-port T-Bus hub. T-Bus is the RS-485 based communications system the NK Series uses...
Our Price: $1,300.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ross NK Series NK-NET NK T-BUS to Ethernet Adapter
Ross Video
Item# ROSS-NK-NET
In an effort to simplify NK routing solutions, and provide a significant cost savings and provide a more cost-effective routing solution, Ross has introduced the NK-NET configuration dongle. This simple, unobtrusive dongle provides users the ability to configure a router, and up to 4 NK remote control panels via DashBoard, without the need of an NK-IPS. NK-NET ships at no extra charge with the purchase of all NK series routers. NK-NET can also be purchased as a stand-alone item for legacy...
Our Price: $280.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ross RCP-ME 1RU Ethernet Enabled 40 Button LCD Display Remote Control Panel for NK Series
Ross Video
Item# ROSS-RCP-ME
The Ross RCP-ME is the Ethernet version of the RCP-NKM, the most popular NK Series control panel and finds a home in a wide range of applications due to its familiarity, flexibility and cost-effectiveness. The RCP-ME has all of the same button programmability as the RCP-NK1 (source, destination, breakaway, level select, macro, protect, take and panel lock), and adds a backlit 16+2 LCD display for display of source and destination names, system warnings and errors. The new RCP-ME is an Ethernet...
Our Price: $1,300.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ross RCP-NK1 1RU 40 LED Illuminated Button Local or Remote Control Panel for NK Series
Ross Video
Item# ROSS-RCP-NK1
The Ross RCP-NK1 is a simple and cost-effective control panel that can be used in a wide variety of applications. Ideally suited as a menu driven source / destination switching control panel for small routers or as a cut-bus or multi-cutbus control panel for any sized router, the RCP-NK1 features 40 soft, fully programmable backlit keys arranged in a 32 + 8 configuration for convenient function key layout. Each button can be configured to operate as a source, destination, breakaway, level...
Our Price: $1,200.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ross RCP-QE36 1RU Ethernet Enabled 36 LCD + 8 Fixed Buttons Control Panel for OB Vans or Production Houses
Ross Video
Item# ROSS-RCP-QE36
The Ross RCP-QE Series offers unmatched flexibility and ease-of-use. They are ideal for use in OB vans or production houses where configurations change regularly, and are equally useful in studios where unlimited configurations enable fast and simple customized setups of each panel. Ethernet based connectivity means increased ease of configuration, and provides for more flexible control architectures. The RCP-QE Series remote control panel offers 18 or 36 colored backlit graphic LCD keys...
Our Price: $4,300.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE 1T-CL-322-US North American 16 Button 2-Gang Wall Mounted Control Panel
tvONE
Item# TV1-1T-CL-322-US
The tvONE 1T-CL-322-US Control Panel is an easy to use cost effective Ethernet based solution for system automation and remote control. It is designed to be highly flexible but simple to install for both experienced system integrators and the smart home user. The control panel consists of 16 LED backlit buttons, each programmable for either a single function or for recalling a sequence of commands in a macro. Each macro can be executed with a single button push, recalling up to...
Our Price: $605.00
Availability: Usually Ships in 5-14 Days
Add to Wish List

Ethernet Controllers

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

ADDERLink ASP-001-US Infinity Manager (AIM) Control Suite - Supports 24 End Points

Dataprobe iPIO-8 8 Port Network I/O Controller

Dataprobe iPIO-16 16 Port Network I/O Controller / GPIO Manager

LYNX Technik RCT 1012 yellobrik Rack Controller

Skaarhoj INLINE-10-V1B Inline 10 w/Blue Pill Inside

Cobalt Digital WAVE CP-84L 2RU 84 LCD R/G/B Back-lit Button Control Panel with Monochrome LCD Graphics for WAVE Series

Cobalt Digital Wave Control Series CP-78 Back-Lit Control Panel w/ 2 General Purpose Inputs & 2 General Purpose Outputs

Kramer KN-30D-LIC Kramer Network Enterprise Management Platform License - Up to 30 Devices

Ross GPI-8941-I16 16 Input GPI I/O openGear Card

Ross GPI-8941-I16-R3 16 Input openGear General Purpose Interface Card GPI I/O with Rear Module

Ross GPI-8941-I32 32 Input GPI I/O openGear Card

Ross GPI-8941-I32-R3 32 Input openGear GPI I/O Card with Rear Module

Ross GPI-8941-O16 16 Output openGear General Purpose Interface GPI I/O Card

Ross GPI-8941-O16-R3 16 Output openGear General Purpose Interface Card GPI I/O with Rear Module

Ross GPI-8941-O32 32 Output GPI I/O openGear Card

Ross GPI-8941-O32-R3 32 Output GPI I/O Card with Rear Module

Ross GPI-8941-I16-O16 openGear General Purpose Interface Card 16 Input / 16 Output GPI I/O

Ross GPI-8941-I16-O16-R3 16 Input / 16 Output openGear General Purpose Interface Card GPI I/O Card with Module

Ross NK Series NK-3RD Third Party Router Interface for NK Series using Pro Bel SW-P-08/Jupiter Esswtich/GVG-7000

Ross NK Series NK-IPS Network Bridge IP Configuration Device for NK Series

Ross NK Series NK-NET NK T-BUS to Ethernet Adapter

Ross RCP-ME 1RU Ethernet Enabled 40 Button LCD Display Remote Control Panel for NK Series

Ross RCP-NK1 1RU 40 LED Illuminated Button Local or Remote Control Panel for NK Series

Ross RCP-QE36 1RU Ethernet Enabled 36 LCD + 8 Fixed Buttons Control Panel for OB Vans or Production Houses

tvONE 1T-CL-322-US North American 16 Button 2-Gang Wall Mounted Control Panel

Sign In

Ethernet Controllers

Narrow Products

By Brand

By Price Range

Filter By