Ethernet Controllers

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

ADDERLink ASP-001-US Infinity Manager (AIM) Control Suite - Supports 24 End Points
Adder Corporation
Item# ADR-ASP-001-US
The ADDERLink™ ASP-001-US INFINITY Manager (AIM) server is a control suite which transforms ADDERLink INFINITY (ALIF) extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co- operative sharing of computers and multicasting of video to any destination. Secure access and communications Using TLS (transport layer security)...
Our Price: $4,203.00
Availability: In Stock
Add to Wish List
Dataprobe iPIO-8 8 Port Network I/O Controller
Dataprobe Inc.
Item# DTPB-IPIO-8
iPIO - Bidirectional Event Transport Dataprobe iPIO gives you the ability to transport digital I/O across Ethernet networks with IP protocols. Multiple iPIO devices can communicate amongst themselves to transport I/O information across your network, and links are bidirectional, so events in either location are reflected at any other site. Any changes in status appear at the other end of the network as relay outputs. 2 Units are required for End-to-End transport. The Dataprobe iPIO-8 offers...
Our Price: $439.00
Availability: In Stock
Add to Wish List
Dataprobe iPIO-16 16 Port Network I/O Controller / GPIO Manager
Dataprobe Inc.
Item# DTPB-IPIO-16
iPIO - Bidirectional Event Transport Dataprobe iPIO gives you the ability to transport digital I/O across Ethernet networks with IP protocols. Multiple iPIO devices can communicate amongst themselves to transport I/O information across your network, and links are bidirectional, so events in either location are reflected at any other site. Any changes in status appear at the other end of the network as relay outputs. 2 Units are required for End-to-End transport. The Dataprobe iPIO-16 offers...
Our Price: $625.00
Availability: In Stock
Add to Wish List
Skaarhoj ETH-SDI-LINK-V1 UDP CCU - Merge Network Data from Multiple RCPs (Remote Control Panel) onto a single SDI
SKAARHOJ
Item# SKA-ETH-SDI-LINK
Skaarhoj ETH-SDI-LINK Receives "UDP Camera Control" information over Ethernet and forwards it on the SDI out connector. Used to merge network data from multiple RCPs onto a single SDI wire. Outstanding differences from previous or similar versions With the ETH SDI Link, you can connect physical SDI products. It can also do virtual GPI. A Note from Skaarhoj....... "What is an RCP"? RCP stands for Remote Control Panel . Such a controller is used for the...
Our Price: $1,023.75
Availability: Usually Ships in 5-14 Days
Add to Wish List
tvONE 1T-CL-322-US North American 16 Button 2-Gang Wall Mounted Control Panel
tvONE
Item# TV1-1T-CL-322-US
The tvONE 1T-CL-322-US Control Panel is an easy to use cost effective Ethernet based solution for system automation and remote control. It is designed to be highly flexible but simple to install for both experienced system integrators and the smart home user. The control panel consists of 16 LED backlit buttons, each programmable for either a single function or for recalling a sequence of commands in a macro. Each macro can be executed with a single button push, recalling up to...
Our Price: $605.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Skaarhoj INLINE-10-V1B Inline 10 w/Blue Pill Inside
SKAARHOJ
Item# SKA-INLINE10V1B
With Inline 10 you'll get the perfect modular controller to use alone or with our other small form factor controllers. The Inline 10 has a row of 6 awesome four-way buttons with RGB coloring, 4 encoder knobs, and 10 customizable graphical OLED displays for function legends. Skaarhoj designed the Inline10 with a number of devices in mind. A comprehensive list of "Blue Pill" supported devies and configurations can be found on the Skaarhoj website. Skaarhoj...
Our Price: $1,337.70
Availability: Usually Ships in 5-14 Days
Add to Wish List
Klark Teknik KT-DANTE64 Network Module - Ethernet Compliant Audio Networking Module
Klark Teknik
Item# KT-DANTE64
The KT-DANTE64 Network Module is a groundbreaking, Ethernet compliant audio networking module, compatible with the KLARK TEKNIK DN9650 and DN9652 Network Bridges. Using technology developed by Audinate, the KT-DANTE64 Network Module provides high performance direct to computer audio recording, flexible routing and true plug and play technology with automatic discovery. Using CAT5/5e cable and standard networking components, KT-DANTE64 distributes multiple streams of audio plus integrated control...
Our Price: $999.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Cobalt Digital WAVE CP-84L 2RU 84 LCD R/G/B Back-lit Button Control Panel with Monochrome LCD Graphics for WAVE Series
Cobalt Digital
Item# CB-WAVE-CP-84L
The Cobalt WAVE CONTROL SERIES CP-84L Remote Control Panel features 84 back-lit LCD dot matrix display buttons. All buttons are illuminated by Red, Green and Blue LED's providing a wide array of background colors to choose from. The frame is 2RU - 3.5 inch tall and is only 3.4 inches deep with removable rack mount "ears" for desktop use or other custom installations. The WAVE series of control panels offer unprecedented flexibility, ease of use & integration. Located on the rear of...
Our Price: $10,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Cobalt Digital Wave Control Series CP-78 Back-Lit Control Panel w/ 2 General Purpose Inputs & 2 General Purpose Outputs
Cobalt Digital
Item# CB-WAVE-CP-78
The Cobalt WAVE Remote Control Panel CP-78 features 78 back-lit buttons. All buttons are illuminated by Red, Green and Blue LED's providing a wide array of background colors to choose from. Factory presets provide a solid starting point from which to customize each button color. The front panel color LCD display keeps you informed of the panel status. The frame is 2RU / 3.5 inches tall and is only 3.4 inches deep with removable rack mount "ears" for desktop use or other custom installations. The...
Our Price: $1,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Atlona AT-ANC-108D 8-Button Network Control Panel
Atlona Technologies
Item# ATNO-AT-ANC-108D
The Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based single output channel switchers. It is designed for easy configuration using the free Atlona Management System (AMS) software resource. The ANC-108D only requires a single category cable, from a PoE-equipped network switch, to deliver both control signal and power, and provide fast, hassle-free installation. Configuration is also fast. Simply download a configuration file from within AMS for Atlona single...
Our Price: $360.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Kramer KN-30D-LIC Kramer Network Enterprise Management Platform License - Up to 30 Devices
Kramer
Item# KR-KN-30D-LIC
6 Options Available
Kramer Network is an enterprise management platform that lets IT and AV professionals easily deploy, configure and manage an entire Pro AV installation from anywhere in the network, including Dante™ and 3rd party devices. KN-30D-LIC is a network license that allows you to use this platform on up to 30 devices. Perfect for: Meeting rooms across multiple buildings Education, university classrooms and lecture halls Digital signage with multiple AV sources to multiple...
Read More
Our Price: $962.94
Availability: Software Download
Add to Wish List
MuxLab 500813 Muximus Linux-Based Network Controller - Allows Users to Control Hub-installed MuxLab Products
MuxLab Inc
Item# MUX-500813
The MuxLab 500813 Muximus Network Controller is a Linux-based PC that allows users to control hub-installed MuxLab products through a friendly, intuitive and easy-to-use web interface called Muximus. When installed on a local area network (LAN), the Muximus Network Controller will scan the LAN for connected MuxLab AV over IP products allowing the user to auto-discover, configure and control the connectivity of these products through an Ethernet Web interface. The Controller may...
Our Price: $698.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Imagine RCP-64LCD-II Magellan 2RU Control Panel with 64 Wideview LCD Buttons
Imagine Communications
Item# RCP-64LCD-II
The Imagine RCP-64LCD-II Magellan 2RU Control Panel with 64 Wideview LCD Buttons The Magellan™ family of control panels provides a fast, powerful, and simple way to control your Imagine Communications or third-party routing systems. Available as a series of 10 programmable hardware panels in 1 or 2RU versions, Magellan panels offer intuitive, web-based configuration - enabling the industry's fastest setup for both local and remote operations. These feature-rich, cost-effective...
Our Price: $7,705.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Skaarhoj ETH-GPI-LINK-DUAL-V1 ETH-GPI Link Dual General Purpose Interface
SKAARHOJ
Item# ETH-OPT-DUAL-V1
Setting up an I/O device have never been this flexible. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Defining parameters - single or multiple - for inputs/outputs is extremely fast, thanks to the drop-down menu structure in UniSketch OS. Connect and control up to 8 devices at the same time! The general-purpose I/O controllers offer 8/16 inputs and 8/16 outputs,...
Our Price: $1,130.03
Availability: In Stock
Add to Wish List
Ross GPI-8941-I16 16 Input GPI I/O openGear Card
Ross Video
Item# GPI-8941-I16
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16 is a 16 Input GPI Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage sense...
Our Price: $1,500.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I16-R3 16 Input openGear General Purpose Interface Card GPI I/O with Rear Module
Ross Video
Item# GPI-8941-I16-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16-R3 is a 16 Input GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $1,900.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I32 32 Input GPI I/O openGear Card
Ross Video
Item# GPI-8941-I32
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I32 is a 32 Input GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage sense...
Our Price: $2,000.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I32-R3 32 Input openGear GPI I/O Card with Rear Module
Ross Video
Item# GPI-8941-I32-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I32-R3 is a 32 Input GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $2,400.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O16 16 Output openGear General Purpose Interface GPI I/O Card
Ross Video
Item# GPI-8941-O16
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O16 is a 16 Output GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage...
Our Price: $1,700.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O16-R3 16 Output openGear General Purpose Interface Card GPI I/O with Rear Module
Ross Video
Item# GPI-8941-O16-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O16-R3 is a 16 Output GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $2,100.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O32 32 Output GPI I/O openGear Card
Ross Video
Item# GPI-8941-O32
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O32 is a 32 Output GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense) or voltage...
Our Price: $2,200.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-O32-R3 32 Output GPI I/O Card with Rear Module
Ross Video
Item# GPI-8941-O32-R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-O32-R3 is a 32 Output GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current...
Our Price: $2,600.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I16-O16 openGear General Purpose Interface Card 16 Input / 16 Output GPI I/O
Ross Video
Item# GPI-8941I16O16
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16-O16 is a 16 Input / 16 Output GPI I/O Card. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact closure (current sense)...
Our Price: $2,100.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross GPI-8941-I16-O16-R3 16 Input / 16 Output openGear General Purpose Interface Card GPI I/O Card with Module
Ross Video
Item# GPI-8941I16O16R3
The GPI-8941 is a General Purpose Interface Card that is housed in the openGear modular chassis. The card is designed to provide a way for customers to integrate GPI/GPO capability into their systems in a scalable, cost effective fashion. Ross GPI-8941-I16-O16-R3 is a 16 Input / 16 Output GPI I/O Card with Rear Module. Each output is switched using isolated relays and can be configured as a contact closure or voltage source output. Each Opto-isolated input can be configured as a contact...
Our Price: $2,500.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ross NK Series NK-3RD Third Party Router Interface for NK Series using Pro Bel SW-P-08/Jupiter Esswtich/GVG-7000
Ross Video
Item# ROSS-NK-3RD
The Ross NK-3RD Third Party Router Interface enables a third-party control system to control an NK Series routing system using the Pro Bel SW-P-08 or the Grass Valley Jupiter ESswtich protocol. Using this protocol, an NK Series router can emulate a Probel router or interface to Grass Valley products via ESswitch (limited to crosspoint switching and crosspoint status / tally requests), allowing control of the NK Series router via a third-party automation system. Features: Enables third-party...
Our Price: $3,100.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List

Ethernet Controllers

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

ADDERLink ASP-001-US Infinity Manager (AIM) Control Suite - Supports 24 End Points

Dataprobe iPIO-8 8 Port Network I/O Controller

Dataprobe iPIO-16 16 Port Network I/O Controller / GPIO Manager

Skaarhoj ETH-SDI-LINK-V1 UDP CCU - Merge Network Data from Multiple RCPs (Remote Control Panel) onto a single SDI

tvONE 1T-CL-322-US North American 16 Button 2-Gang Wall Mounted Control Panel

Skaarhoj INLINE-10-V1B Inline 10 w/Blue Pill Inside

Klark Teknik KT-DANTE64 Network Module - Ethernet Compliant Audio Networking Module

Cobalt Digital WAVE CP-84L 2RU 84 LCD R/G/B Back-lit Button Control Panel with Monochrome LCD Graphics for WAVE Series

Cobalt Digital Wave Control Series CP-78 Back-Lit Control Panel w/ 2 General Purpose Inputs & 2 General Purpose Outputs

Atlona AT-ANC-108D 8-Button Network Control Panel

Kramer KN-30D-LIC Kramer Network Enterprise Management Platform License - Up to 30 Devices

MuxLab 500813 Muximus Linux-Based Network Controller - Allows Users to Control Hub-installed MuxLab Products

Imagine RCP-64LCD-II Magellan 2RU Control Panel with 64 Wideview LCD Buttons

Skaarhoj ETH-GPI-LINK-DUAL-V1 ETH-GPI Link Dual General Purpose Interface

Ross GPI-8941-I16 16 Input GPI I/O openGear Card

Ross GPI-8941-I16-R3 16 Input openGear General Purpose Interface Card GPI I/O with Rear Module

Ross GPI-8941-I32 32 Input GPI I/O openGear Card

Ross GPI-8941-I32-R3 32 Input openGear GPI I/O Card with Rear Module

Ross GPI-8941-O16 16 Output openGear General Purpose Interface GPI I/O Card

Ross GPI-8941-O16-R3 16 Output openGear General Purpose Interface Card GPI I/O with Rear Module

Ross GPI-8941-O32 32 Output GPI I/O openGear Card

Ross GPI-8941-O32-R3 32 Output GPI I/O Card with Rear Module

Ross GPI-8941-I16-O16 openGear General Purpose Interface Card 16 Input / 16 Output GPI I/O

Ross GPI-8941-I16-O16-R3 16 Input / 16 Output openGear General Purpose Interface Card GPI I/O Card with Module

Ross NK Series NK-3RD Third Party Router Interface for NK Series using Pro Bel SW-P-08/Jupiter Esswtich/GVG-7000

Sign In

Ethernet Controllers

Narrow Products

By Brand

By Price Range

Filter By