RF & CATV Combiners

The RF Venue COMBINE8 IEM combiner brings together up to eight in-ear monitor transmitter signals into a single rear panel mounted antenna connector. Any brand IEM set to transmit 50 mW or less may be used, as well as any type of directional antenna. It also provides DC power to up to 8 IEM transmitters with an external power supply, removing the need for wall warts. IEM transmitter combination is important for multi-channel systems to minimize intermodulation artifacts arising from...

The COMBINE4 IEM transmitter combiner brings together up to four in-ear monitor transmitter signals into a single rear panel mounted antenna connector. Any brand IEM may be used, as well as any type of directional antenna. It also provides DC power to up to four IEM transmitters to reduce cable clutter and wall warts. IEM transmitter combination is important for multi-channel systems to minimize intermodulation products arising from multiple adjacent transmitters interfering with...

The HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting...

The OC Series includes professional quality, passive output combiners. These units are designed for use in headends to combine the outputs of multiple modulators and processors. The OC Series employs radiation-proof passive components that provide excellent signal reproduction and years of reliable service. Four models are available, including: OC-8d, 8 inputs; OC-12d, 12 inputs, OC-12f, 12 inputs, band filtered; and OC-16, 16 inputs.

The Contemporary Research QCP8 is a passive VHF/UHF RF combiner for CATV head end applications. The unit has eight inputs and one output. The sides of the enclosure are vented to allow for side by side rack mounting with actively cooled QMOD encoder/modulators. Used for combining up to eight RF sources or combining multiple 45dB out QMOD HDTV Modulators-IPTV Encoders.

The HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting...

The HPC-8 is a Headend Passive Combiner, 8 Port, 5-1000 MHz, Low Loss, RFI Shielded HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel...

The LISTEN Technologies LA-80 is a passive 2-way RF combiner. The LA-80 is a passive device, there's no power supply needed. The unit takes two 2 incoming RF signals and combines them into one 1 outgoing antenna source. In multiple channel applications you may need to use one antenna for multiple transmitters. This is sometimes easier than mounting multiple antennas due to space limitations or aesthetics. This combiner is used in applications where up to two 2 different antenna sources are...

HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting...