Where to Buy TimeCode Displays | Time Code Readers

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Artel XA-1900-C1S IRIG 850nm Fiber Optic Card - ST Connector - Multimode - Transmitter
Artel
Item# ARTL-XA-1900-C1S
The Artel XA/RA-1900A and XR-1900 fiber optic systems are ideal for applications used in military and aerospace industries, transmitting IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or singlemode fiber at 850 nm or 1310 nm. Features: Transmits IRIG and similar NASA and NBS standard instrumentation time-code formats up to 100 kHz Combinations of three different units may be configured to provide point-to-point, point-to-multipoint Built-in regulated...
Our Price: $1,028.50
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm SR-112 Time Code Distripalyzer - Time Code Reshaped & Distributed
Brainstorm Electronics
Item# BRAIN-SR-112
3 Options Available
The Brainstorm SR-112 Distripalyzer will instantly identify time code problems, and with the optional time code generator, fix them supporting all modern SMPTE and EBU SD/HD rates are supported. The industry standard Brainstorm SR-112 Distripalyzer is designed to reshape and distribute time code through its 12 buffered outputs while analyzing it. The reshaper sends clean time code, even over long cables, making it ideal for live environments. The front panel includes a large 8 digit reader...
Read More
Our Price: $1,855.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Telestream SPG9000 Multiformat Video Signal Generator & Timing/Reference System w/6 Configurable Sync Outputs
Telestream
Item# TEL-SPG9000
The Telestream SPG9000 Video Timing and Reference System offers a complete set of reference inputs and outputs, supporting a wide variety of system designs. This timing and reference generator includes a loop-through genlock input, 6 analog black/tri-level outputs, 4 LTC outputs, word clock output, DARS output, general-purpose interface, and management LAN interface, all the features of a complete sync pulse generator! All options are licensed so that they can be purchased with the base unit...
Our Price: $8,158.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Artel XA-1900-C7S Fiberlink IRIG 1310nm Fiber Optic Card - ST Connector - Singlemode - Transmitter
Artel
Item# ARTL-XA-1900-C7S
The FiberLink XA-1900-C7S IRIG Fiber Optic Transmitter is designed to convert wide band IRIG analog signals into modulated light for transmission over fiber optic cables. The transmitter employs linear, intensity modulation and is suitable for use with most optical fibers. The XA-1900 employs a single ended, unbalanced input which is compatible with all IRIG input formats. There is only one operating control on the XA-1900 series. This is an input attenuator, designed to allow input signals...
Our Price: $1,815.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording ACN-CL LOCKIT Timecode Synchronizer for Camera & Audio Recorders/Timecode/Genlock/ACN Compatible
Ambient Recording
Item# AMB-ACN-CL
Being a Lockit at its core, the Ambient ACN-CL carries the DNA of its predecessors and inherits all the unique and appreciated features, combined with the unprecedented ease of use that has been first introduced with the NanoLockit. Battery Running off a changeable Li-Ion battery that can be charged in the unit while operating makes sure you never be let down with depleted power when you need it the least. The supplied NP-50 type battery is not only widely available along with...
Our Price: $660.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
ESE ES-188F 1RU Rackmount NTP Referenced Master Clock and Time Code Generator
ESE
Item# ESE-ES-188F
The ESE ES-188F is an NTP Referenced Master Clock / Time Code Generator. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89, ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-188F to easily interface with new or existing computers, automation and clock systems. Software available for the ES-188F permits...
Our Price: $2,079.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm SR-28 2x8 SMPTE/EBU Longitudinal Time Code (LTC) Distributor/Reshaper
Brainstorm Electronics
Item# SR-28
Like it's big brother the SR-112 Distripalyzer, the Brainstorm SR-28 can drive time code over long cables, making it ideal for synchronization during live shows and remote recording. The SR-28 time code distributor, with two inputs and eight outputs, reshapes time code while distributing it, eliminating amplitude distortions and level fluctuations. The level of each output is individually adjustable via front panel pots. The input is selected via a front panel switch. Also included are 2 power inputs...
Our Price: $645.00
Availability: In Stock
Add to Wish List
Horita TR-100 LED Time Code Reader
Horita Co
Item# TR-100
2 Types Available
The TR-100 is a search LTC reader featuring an adjustable brightness 0.8 inch LED display. The brightness control allows comfortable use in bright light or in a dimly lit studio, while the 0.8" character height is good for up close or across the room viewing. The TR-100 also translates LTC time code into Midi Time Code (MTC) for use in the audio/video workshop. Measures 1.5"H x 8.5"W x 3.25"D and can be can be rack or wall mounted by using an appropriate adapter kit. Features: Reads at speeds...
Read More
Our Price: $486.12
Availability: 2+ Weeks
Add to Wish List
ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier
ESE
Item# ES-249
The ES-249 is designed to accept an RS232C/ASCII signal and output up to eight identical copies.The unit has a single input and eight outputs that are accessible on rear-mounted 9-pin D-sub connectors. Due to the nature of the RS232Csignal, if long runs of cable are required, it may be necessary to distribute a different time code that is then "translated" into RS232C/ASCII before entering the "user." Features: Use for distributing ASCII Time Codes 8 isolated outputs Male DB-9 Input connector Female...
Our Price: $565.49
Availability: In Stock
Add to Wish List
Plura ELC Ethernet NTP to LTC Converter Timecode Over Network Decoder
Plura Broadcast, Inc.
Item# PLUR-ELC
If you're looking for a stand alone product to send linear timecode over an ethernet network, the Plura ELC will help you accomplish it. ELC serves as an LTC generator with two output stages. The data content within the LTC time code is either fed from an NTP server or an MTDoE master device. Both LTC output signals are phase locked to UTC time which is available as well in NTP mode as in MTDoE mode. Time addresses as well as user data (binary groups) of the LTC can be independently configured...
Our Price: $803.70
Availability: In Stock
Add to Wish List
Brainstorm DXD8/PTP PTP Firmware Option for the DXD-8 Universal Clock - Software Download
Brainstorm Electronics
Item# BRAIN-PTP-DXD8
The DXD-8 Universal Clock is designed to be the central source of time in a modern A/V installation. As a master clock generator it provides WC, AES and Video Sync. But with the addition of Brainstorm DXD8/PTP, the DXD-8 truly becomes universal by keeping traditional audio/video equipment and IP networks in perfect sync. The DXD-8 has the capability of being a PTP Grandmaster or a PTP slave. As a PTP master, the DXD-8 can lock to external sync sources such as WC, AES, Video Sync and 10...
Our Price: $645.00
Availability: Software Download
Add to Wish List
ESE ES-101 Low Cost Very Accurate GPS Master Clock / Time Code Generator w/ Option IRIG-B & Option P
ESE
Item# ESE-ES-101IRIGBP
The ESE ES-101/IRIG-B/P is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ASCII (RS-232C), ESE-TC89™ and ESE-TC90™. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12)...
Our Price: $1,181.25
Availability: 2+ Weeks
Add to Wish List
Atomos ATOMSYON01-US Ultrasync One RF-Powered Wireless Timecode and Genlock/Wordclock Device
Atomos
Item# ATO-ATOMSYON01US
Ultrasync One Super compact. Lightweight. The flexibility to configure as a transmitter timecode server or as a receiver client device. The battery life allows a run time to easily last the longest shooting day. Integrating the most features to enable advanced timecode and sync options for multicamera workflows. Atomos UltraSync ONE is the smallest and most cost-effective, RF-powered wireless timecode and genlock/wordclock solution on the market. Full Sync Power - Miniaturized The...
Our Price: $279.00
Availability: In Stock
Add to Wish List
Horita TRG-100 Time Code Reader/Generator
Horita Co
Item# HOR-TRG-100
The TRG-100 is a multi-frame rate SMPTE time code reader/generator with an 8 character red LED display suitable for installation in a studio, video production room, large or small editing suite or in a laboratory or test situation. It can both read and generate time code for SD and HD video frame rates and its small desktop size lets it sit conveniently on a desk top, or be rack or wall mounted. The time code reader can discern between 23.976 and 24 FPS (Frames-Per-Second) time...
Our Price: $663.73
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm DXD-LTC Dual Time Code Firmware Option for DXD Series
Brainstorm Electronics
Item# BRAIN-DXD-LTC
Brainstorm Electronics DXD/LTC is theTime Code Option for the DXD-8 & DXD-16 Universal Clocks. This firmware can generate 2 separate streams of time code simultaneously at different formats. Each stream can be set as a Time Of Day time code generator or a a Simple Run/Stop/Cue Generator locked to the currently selected reference. The DXD/LTC transmits SMPTE 2059-2 "Synchronization Metadata" Management Messages on any PTP port where the SMPTE ST2059 Profile has been enabled. *...
Our Price: $625.00
Availability: Software Download
Add to Wish List
ESE ES-249/UL 1x8 ASCII RS232 Time Distribution Amplifier with UL Option UL/CSA Approved Wall Mount Power Supply
ESE
Item# ESE-ES-249-UL
The ES-249-UL distribution amplifier with UL/CSA approved wall mount power supply is designed to accept RS-232C/ASCII and output up to eight identical copies. The unit has a single input and eight outputs that are accessible on rear mounted 9-pin D-sub connectors. Due to the nature of RS-232C, if long cable runs are required, it may be necessary to utilize a different time code that is later translated into RS-232C. Features: Use for distributing ASCII Time Codes 8 isolated outputs Male...
Our Price: $611.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Horita AVG-50 Active Video SMPTE VITC Time Code Generator
Horita Co
Item# AVG-50
The AVG-50 generates VITC time code and inserts it into the first few lines of active video, rather than into the vertical interval. This allows the VITC to be recorded on the newer and relatively inexpensive digital video recorders and camcorders that record a great picture, but do not record a vertical interval. Now you can use these recorders to record high quality video and VITC time code. Because the VITC time code is on the first few lines of active video, it cannot be seen on standard...
Our Price: $442.72
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Denecke TC MAXI/4 Four Digit Studio Time Code Reader - Minutes & Seconds
Denecke Inc.
Item# DKE-TCMAXI-4-MS
The TC Maxi Studio Time Code Readers display SMPTE/EBU time code with large four inch LEDs. Units feature well formed numbers and will read longitudinal time code from 1/20 to 50 times speed. Features: 4-Digit variable intensity 4" LED readout Time Code and TC/User select inputs Internal intensity control Specifications: 16.25" x 6.25", 5 lbs. INPUT: -20 to +35dB at 10K, 4 pin male cannon POWER: 7 - 14v, 1.5 amps max.
Our Price: $997.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ Option HR - Relay Contact Closure
ESE
Item# ES-101-HR
The ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ... ASCII (RS-232C), ESE-TC89T and ESE-TC90T. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously,...
Our Price: $992.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ES 102U GPS Based Time Code Generator (Options K and 10ns)
ESE
Item# ES-102U-K-10NS
2 Versions Available
The ES-102U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... SMPTE / EBU, ASCII (RS-232C & USB), ESE-TC89T and ESE-TC90T. Six amber LED displays (.55") provide a digital display of the Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features....
Read More
Our Price: $2,037.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-104E-P-J GPS Based NTP Time Server with 19 Inch Front Panel Rackmount & 220 VAC/50 Hz Operation Option
ESE
Item# ES-104EPJ
The ESE ES-104E-P-J provides a practical method of putting accurate time information onto a network. The unit receives GPS time using the supplied antenna. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-104E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-104E is an IPV4/IPV6 compatible NTP Time Server. NTP...
Our Price: $1,395.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
ESE ES-455SMPTE Time Code Reader / Video Inserter
ESE
Item# ES-455
The ES-455 is a microprocessor-based unit which read and video insert SMPTE time code. All controls are front panel mounted while the inputs and outputs are accessible via rear mounted connectors. The ES-455 reads bi-directionally at multi-speed (1/30 to 20x play speed). Position, Size & Brightness controls for the video insert are provided on the ES-455. Features: "Hold" control Reads Time or User Bits (front panel selectable) Inserts white characters on black window Bi-directional, 1/30 to...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-455U SMPTE Time Code Reader and Video Inserter
ESE
Item# ES-455U
The ES-455U from ESE is a Video Character Inserter unit which receives an external source of SMPTE/EBU timecode. 8 digits of Time data (Hours, Minutes, Seconds and Frames) and 8 User Bit digits are superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size, Position and Mask Mode (black background on/off and transparent or solid display). The display mode may be changed to display the Time and User bits either Side-by-Side or Stacked,...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 466 SMPTE/EBU Presettable Up/Down Timer with Rack Mount Option
ESE
Item# ES-466-P
The ES-466 is an eight digit, presettable 24 hour SMPTE Up/Down Timer (00:00:00:00 - 23:59:59:29) with five front panel mounted controls (UP, DOWN, STOP, RESET and PRESET) and an eight digit display. All displays are 0.56" amber LED digits. A SMPTE output is provided on the rear panel XLR connector. The "Bit Order Forward" toggle switch on the rear panel allows the unit to mimic decks that always output "forward" bit order code. EBU Time code is optional. Features: SMPTE Time Code output, EBU optional...
Our Price: $945.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-491VITC Time Code Reader
ESE
Item# ES-491
The ES-491 is designed to read and display SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch). Hours, Minutes, Seconds and Frames are displayed. Decimal points on the display indicate the Video Field and Drop-Frame mode. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification...
Our Price: $422.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List

At first glance, Time Code Generators & Readers may seem mysterious, but they are a common workhorse in video and film production. Without Time Code Generators & Readers many edits would be impossible to achieve, and others would take more effort than they should.Time code gives each frame of video a unique "name" so that you (or anyone else) can find whatever scene you want. With time code, you can go through raw footage, pick a scene, take down the time code of the frame at the beginning of the scene and at the end of the scene. Anyone can now edit the scene perfectly. ShopTime Code Generators & Readersfrom Markertek, Your Pro AV source!

Time Code Generators & Readers

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

Artel XA-1900-C1S IRIG 850nm Fiber Optic Card - ST Connector - Multimode - Transmitter

Brainstorm SR-112 Time Code Distripalyzer - Time Code Reshaped & Distributed

Telestream SPG9000 Multiformat Video Signal Generator & Timing/Reference System w/6 Configurable Sync Outputs

Artel XA-1900-C7S Fiberlink IRIG 1310nm Fiber Optic Card - ST Connector - Singlemode - Transmitter

Ambient Recording ACN-CL LOCKIT Timecode Synchronizer for Camera & Audio Recorders/Timecode/Genlock/ACN Compatible

ESE ES-188F 1RU Rackmount NTP Referenced Master Clock and Time Code Generator

Brainstorm SR-28 2x8 SMPTE/EBU Longitudinal Time Code (LTC) Distributor/Reshaper

Horita TR-100 LED Time Code Reader

ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier

Plura ELC Ethernet NTP to LTC Converter Timecode Over Network Decoder

Brainstorm DXD8/PTP PTP Firmware Option for the DXD-8 Universal Clock - Software Download

ESE ES-101 Low Cost Very Accurate GPS Master Clock / Time Code Generator w/ Option IRIG-B & Option P

Atomos ATOMSYON01-US Ultrasync One RF-Powered Wireless Timecode and Genlock/Wordclock Device

Horita TRG-100 Time Code Reader/Generator

Brainstorm DXD-LTC Dual Time Code Firmware Option for DXD Series

ESE ES-249/UL 1x8 ASCII RS232 Time Distribution Amplifier with UL Option UL/CSA Approved Wall Mount Power Supply

Horita AVG-50 Active Video SMPTE VITC Time Code Generator

Denecke TC MAXI/4 Four Digit Studio Time Code Reader - Minutes & Seconds

ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ Option HR - Relay Contact Closure

ES 102U GPS Based Time Code Generator (Options K and 10ns)

ESE ES-104E-P-J GPS Based NTP Time Server with 19 Inch Front Panel Rackmount & 220 VAC/50 Hz Operation Option

ESE ES-455SMPTE Time Code Reader / Video Inserter

ESE ES-455U SMPTE Time Code Reader and Video Inserter

ESE ES 466 SMPTE/EBU Presettable Up/Down Timer with Rack Mount Option

ESE ES-491VITC Time Code Reader

Sign In

Time Code Generators & Readers

Narrow Products

By Brand

By Price Range

Filter By