Where to Buy TimeCode Displays | Time Code Readers

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Artel XA-1900-C1S IRIG 850nm Fiber Optic Card - ST Connector - Multimode - Transmitter
Artel
Item# ARTL-XA-1900-C1S
The Artel XA/RA-1900A and XR-1900 fiber optic systems are ideal for applications used in military and aerospace industries, transmitting IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or singlemode fiber at 850 nm or 1310 nm. Features: Transmits IRIG and similar NASA and NBS standard instrumentation time-code formats up to 100 kHz Combinations of three different units may be configured to provide point-to-point, point-to-multipoint Built-in regulated...
Our Price: $1,028.50
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm SR-112 Time Code Distripalyzer - Time Code Reshaped & Distributed
Brainstorm Electronics
Item# BRAIN-SR-112
3 Options Available
The Brainstorm SR-112 Distripalyzer will instantly identify time code problems, and with the optional time code generator, fix them supporting all modern SMPTE and EBU SD/HD rates are supported. The industry standard Brainstorm SR-112 Distripalyzer is designed to reshape and distribute time code through its 12 buffered outputs while analyzing it. The reshaper sends clean time code, even over long cables, making it ideal for live environments. The front panel includes a large 8 digit reader...
Read More
Our Price: $1,855.00
Availability: In Stock
Add to Wish List
Telestream SPG9000 Multiformat Video Signal Generator & Timing/Reference System w/6 Configurable Sync Outputs
Telestream
Item# TEL-SPG9000
The Telestream SPG9000 Video Timing and Reference System offers a complete set of reference inputs and outputs, supporting a wide variety of system designs. This timing and reference generator includes a loop-through genlock input, 6 analog black/tri-level outputs, 4 LTC outputs, word clock output, DARS output, general-purpose interface, and management LAN interface, all the features of a complete sync pulse generator! All options are licensed so that they can be purchased with the base unit...
Our Price: $8,158.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Artel XA-1900-C7S Fiberlink IRIG 1310nm Fiber Optic Card - ST Connector - Singlemode - Transmitter
Artel
Item# ARTL-XA-1900-C7S
The FiberLink XA-1900-C7S IRIG Fiber Optic Transmitter is designed to convert wide band IRIG analog signals into modulated light for transmission over fiber optic cables. The transmitter employs linear, intensity modulation and is suitable for use with most optical fibers. The XA-1900 employs a single ended, unbalanced input which is compatible with all IRIG input formats. There is only one operating control on the XA-1900 series. This is an input attenuator, designed to allow input signals...
Our Price: $1,815.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording ACN-CL LOCKIT Timecode Synchronizer for Camera & Audio Recorders/Timecode/Genlock/ACN Compatible
Ambient Recording
Item# AMB-ACN-CL
Being a Lockit at its core, the Ambient ACN-CL carries the DNA of its predecessors and inherits all the unique and appreciated features, combined with the unprecedented ease of use that has been first introduced with the NanoLockit. Battery Running off a changeable Li-Ion battery that can be charged in the unit while operating makes sure you never be let down with depleted power when you need it the least. The supplied NP-50 type battery is not only widely available along with...
Our Price: $660.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Artel RA-1900-7-ST Fiberlink Box
Artel
Item# ARTL-RA-1900-7ST
The Fiberlink RA-1900-7ST fiber optic systems transmit IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or single mode fiber at 850 nm or 1310 nm.Combinations of four different units may be configured to provide point-to-point, point-to-multipoint or drop-and-repeat signal distribution. Ideal for the Military and Aerospace Industries. Features: Built-in regulated power supplies allow operation from unregulated AC or DC sources The systems can...
Our Price: $1,815.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
ESE ES-188F 1RU Rackmount NTP Referenced Master Clock and Time Code Generator
ESE
Item# ESE-ES-188F
The ESE ES-188F is an NTP Referenced Master Clock / Time Code Generator. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89, ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-188F to easily interface with new or existing computers, automation and clock systems. Software available for the ES-188F permits...
Our Price: $2,079.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm SR-28 2x8 SMPTE/EBU Longitudinal Time Code (LTC) Distributor/Reshaper
Brainstorm Electronics
Item# SR-28
Like it's big brother the SR-112 Distripalyzer, the Brainstorm SR-28 can drive time code over long cables, making it ideal for synchronization during live shows and remote recording. The SR-28 time code distributor, with two inputs and eight outputs, reshapes time code while distributing it, eliminating amplitude distortions and level fluctuations. The level of each output is individually adjustable via front panel pots. The input is selected via a front panel switch. Also included are 2 power inputs...
Our Price: $645.00
Availability: In Stock
Add to Wish List
Horita TR-100 LED Time Code Reader
Horita Co
Item# TR-100
2 Types Available
The TR-100 is a search LTC reader featuring an adjustable brightness 0.8 inch LED display. The brightness control allows comfortable use in bright light or in a dimly lit studio, while the 0.8" character height is good for up close or across the room viewing. The TR-100 also translates LTC time code into Midi Time Code (MTC) for use in the audio/video workshop. Measures 1.5"H x 8.5"W x 3.25"D and can be can be rack or wall mounted by using an appropriate adapter kit. Features: Reads at speeds...
Read More
Our Price: $486.12
Availability: 2+ Weeks
Add to Wish List
ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier
ESE
Item# ES-249
The ES-249 is designed to accept an RS232C/ASCII signal and output up to eight identical copies.The unit has a single input and eight outputs that are accessible on rear-mounted 9-pin D-sub connectors. Due to the nature of the RS232Csignal, if long runs of cable are required, it may be necessary to distribute a different time code that is then "translated" into RS232C/ASCII before entering the "user." Features: Use for distributing ASCII Time Codes 8 isolated outputs Male DB-9 Input connector Female...
Our Price: $565.49
Availability: In Stock
Add to Wish List
Plura ELC Ethernet NTP to LTC Converter Timecode Over Network Decoder
Plura Broadcast, Inc.
Item# PLUR-ELC
If you're looking for a stand alone product to send linear timecode over an ethernet network, the Plura ELC will help you accomplish it. ELC serves as an LTC generator with two output stages. The data content within the LTC time code is either fed from an NTP server or an MTDoE master device. Both LTC output signals are phase locked to UTC time which is available as well in NTP mode as in MTDoE mode. Time addresses as well as user data (binary groups) of the LTC can be independently configured...
Our Price: $803.70
Availability: In Stock
Add to Wish List
Brainstorm DXD8/PTP PTP Firmware Option for the DXD-8 Universal Clock - Software Download
Brainstorm Electronics
Item# BRAIN-PTP-DXD8
The DXD-8 Universal Clock is designed to be the central source of time in a modern A/V installation. As a master clock generator it provides WC, AES and Video Sync. But with the addition of Brainstorm DXD8/PTP, the DXD-8 truly becomes universal by keeping traditional audio/video equipment and IP networks in perfect sync. The DXD-8 has the capability of being a PTP Grandmaster or a PTP slave. As a PTP master, the DXD-8 can lock to external sync sources such as WC, AES, Video Sync and 10...
Our Price: $645.00
Availability: Software Download
Add to Wish List
ESE ES-101 Low Cost Very Accurate GPS Master Clock / Time Code Generator w/ Option IRIG-B & Option P
ESE
Item# ESE-ES-101IRIGBP
The ESE ES-101/IRIG-B/P is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ASCII (RS-232C), ESE-TC89™ and ESE-TC90™. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12)...
Our Price: $1,181.25
Availability: 2+ Weeks
Add to Wish List
Atomos ATOMSYON01-US Ultrasync One RF-Powered Wireless Timecode and Genlock/Wordclock Device
Atomos
Item# ATO-ATOMSYON01US
Ultrasync One Super compact. Lightweight. The flexibility to configure as a transmitter timecode server or as a receiver client device. The battery life allows a run time to easily last the longest shooting day. Integrating the most features to enable advanced timecode and sync options for multicamera workflows. Atomos UltraSync ONE is the smallest and most cost-effective, RF-powered wireless timecode and genlock/wordclock solution on the market. Full Sync Power - Miniaturized The...
Our Price: $279.00
Availability: In Stock
Add to Wish List
Horita TRG-100 Time Code Reader/Generator
Horita Co
Item# HOR-TRG-100
The TRG-100 is a multi-frame rate SMPTE time code reader/generator with an 8 character red LED display suitable for installation in a studio, video production room, large or small editing suite or in a laboratory or test situation. It can both read and generate time code for SD and HD video frame rates and its small desktop size lets it sit conveniently on a desk top, or be rack or wall mounted. The time code reader can discern between 23.976 and 24 FPS (Frames-Per-Second) time...
Our Price: $663.73
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm DXD-LTC Dual Time Code Firmware Option for DXD Series
Brainstorm Electronics
Item# BRAIN-DXD-LTC
Brainstorm Electronics DXD/LTC is theTime Code Option for the DXD-8 & DXD-16 Universal Clocks. This firmware can generate 2 separate streams of time code simultaneously at different formats. Each stream can be set as a Time Of Day time code generator or a a Simple Run/Stop/Cue Generator locked to the currently selected reference. The DXD/LTC transmits SMPTE 2059-2 "Synchronization Metadata" Management Messages on any PTP port where the SMPTE ST2059 Profile has been enabled. *...
Our Price: $625.00
Availability: Software Download
Add to Wish List
ESE ES-249/UL 1x8 ASCII RS232 Time Distribution Amplifier with UL Option UL/CSA Approved Wall Mount Power Supply
ESE
Item# ESE-ES-249-UL
The ES-249-UL distribution amplifier with UL/CSA approved wall mount power supply is designed to accept RS-232C/ASCII and output up to eight identical copies. The unit has a single input and eight outputs that are accessible on rear mounted 9-pin D-sub connectors. Due to the nature of RS-232C, if long cable runs are required, it may be necessary to utilize a different time code that is later translated into RS-232C. Features: Use for distributing ASCII Time Codes 8 isolated outputs Male...
Our Price: $611.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording ACN-LP-E Lockit+ Timecode & Sync Generator with Standard Extension/Metadata & Scanning - No RF Antenna
Ambient Recording
Item# AMB-ACN-LP-E
The Ambient Recording ACN-LP-E Lockit+ with Standard Extension is a Timecode and Sync Generator with a Metadata Interface and optional RF Scanning, this version does NOT include an RF Antenna. For over 30 years, Ambient Timecode has been synonymous with precision and reliability. Like the Lockit, the Lockit+ provides all timecode and Sync formats and full ACN compatibility. But wait. there is more! It's called Lockit+ because of its modular design and the many added values. + MODULAR...
Our Price: $1,906.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording LTC-IN-RA180 TC Input Cable - BNC/M 90 Deg to Lemo 5-pin 90 Deg
Ambient Recording
Item# AMB-LTC-IN-RA180
Because different Push-Pull connectors are needed for differing cable outlet directions, it is mandatory to specify the required direction of the cable outlet. Viewing the plugged connector from back with the red dot on top, 6 o'clock (180 degrees). The direction of outlet can not be changed. Signal flow/wiring from BNC to Push-Pull connector. WHY CABLES BY AMBIENT? Quite simply: because they are better. We rely on premium quality and high-end material. Better shielding: We use a...
Our Price: $120.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording ACN-CP Lens Metadata Cable for Lockit+
Ambient Recording
Item# AMB-ACN-CP
The ACN-CP is a metadata interface cable for camera lenses with Cooke protocol to the Lockit+. The Lockit+ stores key Cookelens metadata frame-accurately in an open file format (supported protocol: Cooke/i3 - "i cubed"). Record lens data on the internal web server or connect an USB stick for recording. To do so connect the metadata interface of the lens with the blue ACN connector of the Lockit+ with the ACN-CP Features: Accessory of the Lockit+. Metadata Interface between Lenses and Lockit+. Supports...
Our Price: $180.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording ACN-LP-S Lockit+ with Standard Extension / Timecode Synchronizer / Genlock Sync / Metadata Management
Ambient Recording
Item# AMB-ACN-LP-S
The Lockit+ is designed to serve different situations on set or in the studio. With the Standard Extension it can be elegantly operated both from the sound cart and sound bag. In future there will be different extensions available. The built-in server spans a local WiFi, giving users browser-based access to all the Lockit+ features via mobile device or computer. The web interface gives access to advanced generator settings and monitoring of all Lockit devices within the ACN.Plug the separately available...
Our Price: $2,062.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Ambient Recording TC-SYNC Timecode and Sync Output Cable for ACN-ML to 788T Wordclock or ACN-CL for ARRI Amira/AlexaMini
Ambient Recording
Item# AMB-TC-SYNC
Designed to work with the company's Master Lockit & Lockit Compact time code devices, the Ambient Recording TC-SYNC is a cable that outputs time code and genlock sync to ARRI Amira and Alexa Mini cameras. You'll find a 5-pin LEMO connection at one end of the cable for your Ambient Recording device. At the other, you'll find both a 5-pin LEMO connection for TC, and a BNC connection for sync. Specifications: For Use with Ambient Master Lockit & Lockit Compact Devices, ARRI Alexa Mini and ARRI Amira Connections 2...
Our Price: $160.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Atomos ATOMXSYON01 AtomX Ultrasync One RF-powered Wireless Timecode and Genlock/Wordclock
Atomos
Item# ATO-ATOMXSYON01
Atomos UltraSync ONE is the smallest and most cost-effective, RF-powered wireless timecode and genlock/wordclock solution on the market. Full Sync Power, Miniaturized The UltraSync ONE is a highly accurate, wireless timecode, genlock and word clock all in one product. Configure UltraSync ONE as a timecode transmitter or receiver. Set the transmitter to generate timecode internally, or to follow external timecode. You can even use the SYNC port for a second LTC, genlock...
Our Price: $279.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Brainstorm ANT GNSS 1 Timing Reference Antenna for DXD Series Universal Clocks/Generators - Outdoor IP673 Rated
Brainstorm Electronics
Item# BRAIN-ANT-GNSS-1
2 Type Available
The Brainstorm Electronics ANT GNSS 1 is a High Rejection, High Gain Time Sync Antenna for DXD/GPS receivers. This full GNSS band antenna covers GPS L1, GLONASS L1, Galileo E1 and Beidou B1 satellite frequency bands. It is is ideal for Brainstorm DXD/GPS receivers as its filtering design allows wideband coverage while achieving superior out-of- band rejection and high gain 40 dB performance. Ready for outdoor installs the IP673 rated antenna comes in a small, conical form factor to minimize...
Read More
Our Price: $275.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Denecke JB-1 Compact Synchbox Time Code Generator with Display - TCXO Crystal & 23.976 HD Compatible
Denecke Inc.
Item# DKE-JB-1
The Denecke JB-1 features a display and menu system, which allows for ease of use and display of timecode and settings. It reads, generates and jam syncs to all standard frame rates including 23.976 for High Definition shoots. The JB-1 features an automatic jam sync capability, which senses the incoming timecode rate. Cross jamming of different rates can be accomplished as well. The advanced Temperature Compensated Crystal Oscillator (TCXO) has ten times the frequency stability...
Our Price: $292.60
Availability: Usually Ships in 5-14 Days
Add to Wish List

At first glance, Time Code Generators & Readers may seem mysterious, but they are a common workhorse in video and film production. Without Time Code Generators & Readers many edits would be impossible to achieve, and others would take more effort than they should.Time code gives each frame of video a unique "name" so that you (or anyone else) can find whatever scene you want. With time code, you can go through raw footage, pick a scene, take down the time code of the frame at the beginning of the scene and at the end of the scene. Anyone can now edit the scene perfectly. ShopTime Code Generators & Readersfrom Markertek, Your Pro AV source!

Time Code Generators & Readers

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

Artel XA-1900-C1S IRIG 850nm Fiber Optic Card - ST Connector - Multimode - Transmitter

Brainstorm SR-112 Time Code Distripalyzer - Time Code Reshaped & Distributed

Telestream SPG9000 Multiformat Video Signal Generator & Timing/Reference System w/6 Configurable Sync Outputs

Artel XA-1900-C7S Fiberlink IRIG 1310nm Fiber Optic Card - ST Connector - Singlemode - Transmitter

Ambient Recording ACN-CL LOCKIT Timecode Synchronizer for Camera & Audio Recorders/Timecode/Genlock/ACN Compatible

Artel RA-1900-7-ST Fiberlink Box

ESE ES-188F 1RU Rackmount NTP Referenced Master Clock and Time Code Generator

Brainstorm SR-28 2x8 SMPTE/EBU Longitudinal Time Code (LTC) Distributor/Reshaper

Horita TR-100 LED Time Code Reader

ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier

Plura ELC Ethernet NTP to LTC Converter Timecode Over Network Decoder

Brainstorm DXD8/PTP PTP Firmware Option for the DXD-8 Universal Clock - Software Download

ESE ES-101 Low Cost Very Accurate GPS Master Clock / Time Code Generator w/ Option IRIG-B & Option P

Atomos ATOMSYON01-US Ultrasync One RF-Powered Wireless Timecode and Genlock/Wordclock Device

Horita TRG-100 Time Code Reader/Generator

Brainstorm DXD-LTC Dual Time Code Firmware Option for DXD Series

ESE ES-249/UL 1x8 ASCII RS232 Time Distribution Amplifier with UL Option UL/CSA Approved Wall Mount Power Supply

Ambient Recording ACN-LP-E Lockit+ Timecode & Sync Generator with Standard Extension/Metadata & Scanning - No RF Antenna

Ambient Recording LTC-IN-RA180 TC Input Cable - BNC/M 90 Deg to Lemo 5-pin 90 Deg

Ambient Recording ACN-CP Lens Metadata Cable for Lockit+

Ambient Recording ACN-LP-S Lockit+ with Standard Extension / Timecode Synchronizer / Genlock Sync / Metadata Management

Ambient Recording TC-SYNC Timecode and Sync Output Cable for ACN-ML to 788T Wordclock or ACN-CL for ARRI Amira/AlexaMini

Atomos ATOMXSYON01 AtomX Ultrasync One RF-powered Wireless Timecode and Genlock/Wordclock

Brainstorm ANT GNSS 1 Timing Reference Antenna for DXD Series Universal Clocks/Generators - Outdoor IP673 Rated

Denecke JB-1 Compact Synchbox Time Code Generator with Display - TCXO Crystal & 23.976 HD Compatible

Sign In

Time Code Generators & Readers

Narrow Products

By Brand

By Price Range

Filter By