Neumann BCM 705 Dynamic Studio Mic w/Hypercardioid Polar Pattern

BCM 705 - Overview

• Features:

  • Mechanical
  • The microphone headgrille twists off easily for quick cleaning. Neumann offers optional, color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her individual headgrille. In front of the capsule, mounted on a frame holder, a fine gauze serves as a built-in popscreen.
  • The microphones of the Broadcast Line have an elastic mount against structure-borne noise, that is compatible with standard broadcast-segment microphone arms.
    Acoustic
  • The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the speech intelligibility. The bass frequency response is designed to compensate for the overemphasis of the bass caused by the proximity effect.
    The integrated Pop Screen
  • A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.
    Mounting
  • The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio boom arm.
  • A thread adapter to fit different connector threads is included. In order to provide protection from structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.
  • The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.
    Other
  • Dynamic capsule
  • Hypercardioid directional characteristic
  • Characteristic, functionally optimized design*
  • Integrated, neutral pop protection
  • Integrated elastic suspension
  • Individual headgrilles for different users
  • Colored rings to identify the replacement headgrilles
  • Easy removal and cleaning of microphone headgrille (with bayonet mount)
  • Mechanical compatibility with standard studio boom arms
  • Multi-level isolation from structure-borne noise
  • No power supply required
    * The design of the microphone is a registered design of the Georg Neumann GmbH in certain countries.
   

• Specifications:

  • Acoustical operating principle Pressure gradient transducer
  • Directional pattern Hypercardioid
  • Frequency range 20 Hz ... 20 kHz
  • Sensitivity at 1 kHz into 10 kohm 1.7 mV/Pa
  • Rated impedance 200 ohms
  • Rated load impedance 10 kohms
  • Equivalent noise level, CCIR1) 32 dB
  • Equivalent noise level, A-weighted1) 18 dB-A
  • Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 62 dB
  • Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 76 dB
  • Weight 500 g
  • Diameter 64 mm
  • Length 85 mm
  • Height (without suspension) 110 mm
    1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
   

• GTIN:

  0615104085077