Audix SCX-25 Condenser Microphone - Matched Pair - Plus or Minus 1 dB

ITEM #: AUD-SCX25A-MP MFG #: SCX25A-MP

Primary Image
Free Shipping with $49 Minimum Order

Item unavailable. Please select another option.

Ask a Markertek Expert if you need assistance finding an appropriate substitute.

List Price:

$2,279.00

Our Price:

$1,899.00

Availability: Usually Ships in 5-14 Days.
Please Email, Chat or Call (800) 522-2025 for Detailed Delivery Info
iAvailability Description Popup


SCX25A-MP - Overview

When you need accurate stereo microphones that are synced with each other, the Audix SCX25AMP Matched Pair is the perfect set. Featuring two matched SCX25A microphones, you can rely on these microphones for any stereo field recording you can think of.

The Audix SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.

The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

Affectionately referred to as "The Lollipop," The SCX25A cardioid studio condenser microphone is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra, and symphony sections.

  • Features:

    • Innovative design
    • Isolated capsule suspension system
    • Miniaturized pre-amp
    • Extremely small footprint (brass body only 4 inches long)
     
  • Specifications:

    • Transducer Type: Condenser
    • Frequency Response: 20Hz - 20kHz
    • Polar Pattern: Cardioid
    • Output Impedance: 200Ω
    • Sensitivity: 28mV/Pa @ 1k
    • Equivalent Noise Level: 14dB (A-weighted)
    • Signal to Noise Ratio: 80dB
    • Maximum SPL: ≥135dB
    • Dynamic Range: 121dB
    • Power Requirements: 48V - 52V phantom
    • Connector: 3-pin XLRm
    • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
    • Materials/Finish: Machined Brass/Black Finish
    • Weight: 8.6oz (244g)
    • Length: 5.8" (148mm)
     
  • GTIN:

    0687471241158
     

SCX25A-MP - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov