The DSAN IP-2000X-L Network Extender is an IP address-configurable adapter that enables control and display of Limitimer over local networks or the Internet.
This setup requires an additional unit; a minimum of 2 units (1 server and 1 client) - one configured as the server, the other(s) configured as client(s) (but are sold separately so that additional units may be purchased individually). You may assign it a fixed IP address or let the network router assign it an available IP address via dynamic host control protocol (DHCP). Point the Extender to the IP address that was assigned to the server. Either the Extender or Limitimer must be powered. Power will flow to both devices from a signal source.
You may use up to five additional Network Extenders as clients. You may also connect a second Limitimer timer to a client Extender and set it as "Client". This allows timer control from two different points.
The signal exiting the client Extender is the pure Limitimer data stream. You may also (a) connect this to the Video Clock VC-2000LT; and/or (b) connect a Bluetooth transceiver set up as a transmitter to the client data stream to create a bridge to drive additional signal lights.