Radial J48 Active 48V Phantom Powered Direct Box w/Digital Switching Supply

ITEM #: RAD-J48 MFG #: R800 3001 (J48)

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5
Free Shipping with $49 Minimum Order

List Price:

$300.00

Our Price:

$249.99

Availability: In Stock
iAvailability Description Popup


R800 3001 (J48) - Overview

The Radial J48 is a great sounding active direct box that has been optimized to produce maximum headroom while working within the limited current available from standard 48V phantom power. By employing a unique switching power supply, the J48 is capable of peak transients to 9 volts without choking. The result is lower harmonic distortion, half the inter-modulation distortion and significantly improved dynamics over other DIs.

Features include a -15dB pad, 180degree polarity reverse, a unique merge function to mix two signals to mono, an 80Hz high-pass rumble filter, and ground lift. Like all Radial products, the J48 is built to handle the abuse on the road and features a unique welded I-beam construction for years of trouble free performance.

  • Features:

    • Active 48-Volt phantom powered direct box
    • Minimal power draw with high rail voltage
    • Will not choke when driven hard
    • Low inter-modulation distortion
     
  • Specifications:

    • Audio circuit type: Proprietary analog circuit with low-noise op-amp
    • Frequency response: 20Hz ~ 20kHz
    • Dynamic range: 109dB
    • Noise floor: -99dB below 0dBu
    • Equivalent input noise: -103dBu
    • Maximum input: +10dBu
    • Phase deviation: +10° at 20Hz | 0° at 1kHz | -1° at 20kHz
    • Total harmonic distortion: 0.002% @ -5dBu
    • Inter-modulation distortion: 0.003% @ -3dBu
    • Input impedance: 220kΩ - 1/4" input
    • Output impedance: 600Ω - XLR output
    • Merge function: IN and THRU jacks are summed to mono
    • Input pad: -15dB
    • Polarity: 180§ signal polarity reverse switch
    • Low-cut filter: -3 dB @ 80Hz
    • Ground lift: Disconnects pin-1 at XLR output
    • XLR configuration: AES standard (pin-2 hot)
    • Power: 48V phantom - proprietary digital switching
    • Construction: 14 gauge steel chassis and outer shell
    • Finish: Durable powder coat
    • Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
    • Weight: 1.55 lb (720 g)
    • FCC approval: Complies with section 15 of the FCC Rules
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable
     
  • GTIN:

    0676101034079
     

R800 3001 (J48) - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov