Conex - FJ-700 - Four Channel Cell Phone Mixer

FJ700 - Overview

• Features:

  • Four Channel Mixer. Each input channel has switch selectable mic or line level input
  • Each mixer input has balanced XLR connector and 1/4" unbalanced input for stereo or mono source
  • Easy-access battery compartment for 3AA batteries and jack for external power
  • Works with most cell phones or with a land line phone
  • Separate adjustments for Cell and Land line send and receive levels - Set once and forget
  • Four separate 1/4" headphone channels with separate volume controls
  • Separate source selection switches for "Host" headphone and for the three "Guest" headphones. Switches allow monitoring phone send and/or receive and external audio such as off-air receiver. Host channel can also be used as a cue channel for 2 of the inputs
  • Extra rugged metal package with "drop" protection for the switches and knobs
  • Separate line output jack to feed recorders, etc. Output is switch-selectable to feed the main mixer output, or the phone receive signal
  • Internal side-tone level adjustment for cell phones that do not provide side tone (so speaker can hear himself in the headphones)
  • Compact - 7.2 x 5.2 x 1.9"
  • LED level meter, with low battery indicator
   

• Specifications:

  • Audio Inputs:
  • Mic 1 XLR: Female jack. Transformer balanced and isolated. 600 ohms
  • Mic 2/LINE: XLR Female jack. Transformer balanced and isolated 600 ohms. Gain switchable from 0 dB (line position) to -50 dB (Mic position)
  • Aux IN: 3.5 mm miniature phone jack accepts balanced audio from a portable mini-disk player, remote console, etc
  • Tuner IN: 3.5 mm miniature phone jack accepts balanced audio from a portable radio or TV tuner. Un-balanced input, level controlled by the tuner
    
    Audio Outputs:
  • AUX Out: A 3.5 mm stereo phone jack feeds balanced audio to any external device such as a recorder. Level is nominally -10 dBm. Transformer balanced and isolated. Output source is selectable via an internal jumper.
  • PHONES:Two 1/4" stereo phone jacks feed FlipJack audio to a 32 ohm - 600 ohm headphone. The headphone jacks have their own front panel level control.
    
    Controls:
  • Monitor: This switch selects what the headsets will hear. The Monitor Switch positions are:
    AIR: audio feeding the TUNER IN jack
    RCV: audio RECEIVED by the Cell Phone
    SEND: audio that is being SENT to the cell phone
    MIC2/LINE: audio on the MIC2/LINE channel
    AUX: audio on the AUX channel
    SEND Level: Adjusts audio level sent from Mic/Line Inputs to cell phone
    RCV Level: Adjusts audio level sent from cell phone to the head phone monitor amplifier
  • Power: 3 'AA' Alkaline batteries or external 6 - 19 VDC
  • Dimensions (WxDxH): 4.5 x 4 x 1.35"
  • Panel level control