Panasonic PT-RZ970LBU7 10000 Lumens - Laser - WUXGA Resolution 1920 x 1200 - DLP Projector - No Lens - Black

PT-RZ970LBU7 - Overview

• Features:

  • Laser 1-chip DLP, 10,000 lumens (center), WUXGA
  • High brightness and excellent image quality with laser light source
  • Maintenance free up to 20,000 hours with dust-resistant optical block and long lasting laser engine
  • Free 360 degrees installation and Geometric Manager Pro function
  • 10,000:1 contrast ratio
   

• Specifications:

  • BTU value: Max 3,584 BTU
  • Lens PT-RZ970B/W: Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm
  • Lens PT-RZ970LB/LW: Optional powered zoom/focus lenses and xed-focus lens
  • Center-to-corner uniformity 3: 90%
  • Contrast 3: 10,000:1 (All White/All Black) (Dynamic Contrast3)
  • Resolution: 1920 + 1200 pixels
  • Scanning frequency RGB: fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
  • Scanning frequency Video/S-Video: fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
  • Optical axis shift: Vertical: +50%, -16%(powered), Horizontal: +30%, -10%
  • Installation: Ceiling/floor, front/rear, 360 degree free installation
  • Terminals SDI IN: BNC + 1, 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
  • Terminals HDMI IN: HDMI 19-pin + 1, Deep Color, compatible with HDCP
  • Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only
  • Terminals RGB 1 IN: BNC + 5
  • Terminals RGB 1 IN R, G, B: R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
  • Terminals RGB 1 IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
  • Terminals RGB 1 IN Y/C: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
  • Terminals RGB 1 IN Video: 1.0Vp-p, 75 ohms
  • Terminals RGB 2 IN: D-sub HD 15-pin (female) + 1
  • Terminals RGB 2 IN R, G, B: R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
  • Terminals RGB 2 IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
  • Terminals SERIAL/MULTI PROJECTOR SYNC IN: D-sub 9-pin (female) + 1 for external control (RS-232C compliant)
  • Terminals SERIAL/MULTI PROJECTOR SYNC OUT: D-sub 9-pin (male) x 1 for link control
  • Terminals Remoter 1: In M3 jack x 1 for wired remote control
  • Terminals Remoter 1 Out: M3 jack x 1 for link control (for wired remote control)
  • Terminals Remoter 2 In: D-sub 9-pin (female) x1 for external control (parallel)
  • Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
  • connection, 100Base-TX, compliant with PJLink™ (Class 1) Deep Color, HDCP
  • Power cord length: 3.0 m (9 ft 10 in)
  • Cabinet materials: Molded plastic
  • Operation noise : 41dB (37dB[QUIET1] / 35dB[QUIET2])
  • Operating temperature: 0-45 °C (32-113 °F) 6
  • Operating humidity: 10%-80% (no condensation)
  • Brightness: 10.000 lumens (centre)/ 9.400 lumens
  • Technology: 1-Chip DLP Laser
  • DLP™ chip Panel size: 17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
  • DLP™ chip Display method: DLP™ chip + 1, DLP™ system
  • DLP™ chip Pixels: 2,304,000 (1920 + 1200) + 1, total of 1,024,000 pixels
   

• GTIN:

  0885170424036