Sescom 6-Position Variable 3-Pin XLR Inline Attenuator for High Levels

ITEM #: SES-MULTI-PAD-2 MFG #: SES-MULTI-PAD-2

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5
Sescom
Free Shipping with $49 Minimum Order

List Price:

$78.49

Our Price:

$71.49

Add to Wish ListLeasing Options
Availability: In Stock
iAvailability Description Popup
Report Lower PriceLarge Quantity Quote

SES-MULTI-PAD-2 - Overview

The Sescom SES-MULTI-PAD-2 is the Ultimate Selectable Level Cut Balanced Audio Attenuator Pad for Your Loud Recordings that Plugs into Your Equipment I/O's or Inline Cables!

The Sescom SES-MULTI-PAD-2 attenuator reduces the power of your signal in selectable decibel increments of -25dB, -35dB, -45dB, -55dB, -65dB and -75dB without appreciably distorting signal waveform. It is housed in the same do-it-all enclosure as Sescom's flagship IL-19 and is ready to plug directly into other equipment's outputs or inputs with its built in XLR connectors. A long time requested design that's useful as an audio engineering tool as much as a problem solver in the field or in the studio. Can also be used with adapters to attenuate unbalanced audio in a pinch with no ill effects.

Set the level of attenuation YOU NEED and ELIMINATE DISTORTION from hot audio signals with the SES-MULTI-PAD-2 today!

Not intended for use with phantom power

  • Features:

    • Six Position rotary switch allows Precision attenuation amounts of -25, -35, -45, -55, -65 and -75 decibels
    • Stops overloading peaks and distortion - Provides totally Flat, Full-Bandwidth across-the-board level cut; lowering the signal to the level you need
    • Inline design with Built-In Male and Female XLRs right in the housing: Plugs directly into equipment's inputs OR outputs; it can also be used between (2) XLR cables due to its "pluggable" form factor
     

  • Specifications:

    • Product Dimensions: 3.75" x 1.06" x 1.63"

    • Attenuation Value:
      -25 dB
      -35 dB
      -45 dB
      -55 dB
      -65 dB
      -75 dB

    • Frequency Response Deviation (20Hz-20kHz):
      -25 dB: <0.1 dB
      -30 dB: <0.1 dB
      -45dB: <0.1 dB
      -55dB: <0.1 dB
      -65dB: <0.2 dB
      -75dB: <0.75 dB

    • Signal to Noise Ratio 0dBFS, A-Weighted:
      -25 dB: 92 dB
      -35 dB: 81 dB
      -45 dB: 71 dB
      -55 dB: 61dB
      -65 dB: 51dB
      -75 dB: 41dB

    • Total Harmonic Distortion 1KHz, 0 dBFS:
      -25 dB: <0.001%
      -35 dB: <0.002%
      -45 dB: <0.006%
      -55 dB: <0.02%
      -65 dB: <.007%
      -75 dB: <0.2%

    • Maximum Input Level:
      -25 dB through -75 dB: >24 dB

    • Maximum Output Level:
      -25 dB: >-1dB
      -35 dB: >-13 dB
      -45 dB: >-24 dB
      -55 dB: >-33 dB
      -65 dB: >-44 dB
      -75 dB: >-53 dB

    • Dynamic Range:
      -25 dB: >91 dB
      -35 dB: >68 dB
      -45 dB: >47 dB
      -55 dB: >28 dB
      -65 dB: >7 dB
      -75 dB: >-10 dB

    • Gain:
      -25 dB: -27 dB
      -35 dB: -37 dB
      -45 dB: -48 dB
      -55 dB: -57 dB
      -65 dB: -68 dB
      -75 dB: -77dB

    • Input Impedance:
      -25 dB: 940 Ohms
      -35 dB: 980 Ohms
      -45 dB: 990 Ohms
      -55 dB: 1k Ohms
      -65 dB: 1k Ohms
      -75 dB: 1k Ohms

    • Output Impedance:
      -25 dB: 940 Ohms
      -35 dB: 980 Ohms
      -45 dB: 990 Ohms
      -55 dB: 990 Ohms
      -65 dB: 1k Ohms
      -75 dB: 1k Ohms

    • Phase Deviation:
      -25 dB: <.1 deg
      -35 dB <.1 deg
      -45 dB <.1 deg
      -55 dB <.1 deg
      -65 dB: <0.5deg
      -75 dB 1.5 deg
     

Required Accessories

SES-MULTI-PAD-2 - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov