Attero Tech UNDX210plus 4x2 Channel 2 Gang US Wall Plate with XLR Phoenix I/O PoE

ITEM #: ATEC-UNDX210PLUS MFG #: UNDX210+

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UNDX210PLUS

UNDX210+ - Overview

The Attero unDX2IO+ Dante™ Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT-5/6 cable. The unDX2IO+’s size and I/O density make it easy to put Dante™ connectivity wherever it's needed.

Applications:

  • Easily accessible microphone audio interface for presentation audio systems in meeting spaces, classrooms, theaters and hospitality venues
  • House of worship Dante™ connectivity for musicians and worship leaders
  • Conveniently located audio network I/O for portable AV systems in convention spaces and hospitality venues

    • Features:

      • Small form factor, can be unobtrusively located near analog sources or sinks
      • Four input gains to accommodate common line levels, dynamics, and phantom powered mics
      • +48V phantom power per channel - powers all types of phantom powered microphones typically used in installed AV systems
      • Analog output gain is software adjustable between 0dB and -60dB plus mute to accommodate all types of line input levels (at 0dB input gain) and +20dBu maximum output levels
      • Full Dante™ system status LEDs on the front panel
       

    • Specifications:

      • Mic/Line Input Type: Balanced and RF filtered XLR
      • Phantom Power: +48V, software selectable
      • Mic/Line Gain: -15dB (pad active), 0dB, +25dB, +40dB, software selectable
      • Input Impedance: >1.8K ohms at any gain setting
      • Equivalent Input Noise: -115dBu (+40dB gain)
      • Maximum Input Levels: +20dBu @ 0dB gain (pad active), +5dBu
      • @ 0dB gain, -22dBu @ +25dB gain, -38dBu @ +40dB gain
      • Side Line Input Type: Balanced and RF filtered 3-pin depluggable, with software selectable pro or consumer input sensitivity
      • Output Type: Balanced line level on XLR. with automatic muting on loss of Dante signal
      • Output Gain: 0dB to -60dB plus mute, software selectable
      • Output Noise: <-85dBu @ 0dB gain
      • Maximum Output Level: +20dBu (@ 0dB output gain)
      • System THD: <.05% at any gain, input signal 3dB below maximum
      • PoE Class: Class 0 802.3af PoE PD compliant
      • Certifications: FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A)
      • Dimensions(W x H x D): 3.54 inch x 4.2 inch x 1.88 inch
      • Operating Temperature: 0°C - 40°C
       

    Required Accessories

    UNDX210+ - Required Accessories

      Recommended Accessories

      Similar Products

      California Residents:
      WARNING:
      Cancer and Reproductive Harm - www.P65Warnings.ca.gov