Shure WL93 Subminiature Omnidirectional Lavalier Mic - Black - 4 Foot Cable

ITEM #: WL93 MFG #: WL93

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2
Free Shipping with $49 Minimum Order

Item unavailable. Please select another option.

Ask a Markertek Expert if you need assistance finding an appropriate substitute.

List Price:

$95.00

Our Price:

$83.00

Availability: In Stock
iAvailability Description Popup


WL93 - Overview

Subminiature Omnidirectional Lavalier Microphone - Black with 4ft Cable

Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications. All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter.

  • Features:

    • Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement
    • Small, inconspicuous mounting hardware
    • Full, clear sound comparable to larger microphones
    • Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
    • Controlled low-frequency rolloff reduces low-frequency clothing and room noise
    • Low distortion, wide dynamic range
    • Uniform omnidirectional polar pattern
    • Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband
    • Wide-range phantom powering (SM93) accepts all commonly used voltages
     
  • Specifications:

    • Type: Condenser (electret bias)
    • Frequency Response: 50 to 20,000 Hz
    • Polar Pattern: Omnidirectional, uniform with frequency
    • Output Impedance: 3000 ohms
    • Output Level (1 Pascal = 94 dB SPL): Open Circuit Voltage: -38 dBV/Pa (13 mV)
    • Output Clipping Level (at 1,000 Hz): 0.25 V at 120 dB
    • Total Harmonic Distortion: Less than 1% at 120 dB
    • Maximum SPL: 120 dB
    • Dynamic Range (maximum SPL to A-weighted noise level): 102 dB
    • Output Noise (equivalent SPL): 18 dB typical, A-weighted
    • Signal-to-Noise Ratio: 76 dB at 94 dB SPL (IEC 651)
    • Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)*
      *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector
    • Recommended Operating Voltage: 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4)
    • Current Drain: 40 microA typical
    • Environmental Conditions:
      - Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F)
      - Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F)
    • Cable: Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F
    • Case: Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille
    • Net Weight: Microphone: 16 g (0.57 oz)
     
  • GTIN:

    0042406055338
     

WL93 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov