The Clear-Com PRC2-19 is a UHF wireless IFB receiver beltpack. This 7.3-ounce receiver beltpack is small and simple in design. The spring-loaded clip allows the receiver to be securely mounted on belts or removed to be worn in the pockets. The rugged machined aluminum housing protects the beltpack. The design uses +/-20 kHz FM deviation for efficient use of the bandwidth, with compandor noise reduction circuitry for an excellent signal to noise ratio. This is an ideal for discreetly monitor program audio during a production.
Basic operation is simply a matter of rotating the knob to turn power on and adjusting the volume level. Additional frequencies are added by holding the knob in until the LED begins blinking and the receiver begins to scan. The receiver will search for signals that contain a pilot tone and automatically stop scanning and wait for the operator to either store that frequency or continue scanning. The default frequency of the receiver is set by two rotary switches on the side panel. Up to five additional frequencies can also be programmed into the receiver memory using the scan mode. If more than one frequency is stored in the receiver, the operator can scroll through all stored frequencies by simply pressing the volume knob.