Cobalt Digital 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync with 2110-DC-01 SMPTE ST 2110

9904-UDX-INDIGO2110DC01 - Overview

• Features:

  • High-density openGear® comprehensive UHD UDX solution
  • Supports all popular formats: 480i, 576i, 720p, 1080i, 1080PsF, 1080p, 2160p. Can support/accept 3G Level A or Level B-DL input with output as Level A or B-DL (via UI control) and also support RGB 4:4:4 / YCbCr 4:4:4 (see Ordering Info for details).
  • Full up/down conversion between HD/3G, ST 2082 12G-SDI single-wire, and SDM/2SI quad 3G-SDI based formats, with ST 2082 12G-SDI single-wire and quad 3G UHD available at both input and output
  • Supports Square Division Multiplex (SDM) and Two-Sample Interleave (2SI) quad UHD formats
  • 12G-SDI and quad 3G frame sync and user delay
  • Supports Cobalt's Reflex (JSON) Protocols
  • Full embedded audio processing with user delay offset and AES I/O
  • Noise Reduction and Detail Enhancement provide image quality optimization
  • Remote control/monitoring via DashboardT software, OGCP-9000 remote control panels, or Cobalt's RESTful-based Reflex protocol
  • Hot-swappable
  • Many options available including DANTE
   

• Specifications:

  • 12G/6G/3G/HD/SD-SDI Input/Outputs
    (6) 75Ω inputs (max)
    (8) 75Ω outputs (max)
  • SDI Formats Supported: SMPTE ST2082-1,10, 424M, 292M, SMPTE 259M-C. All inputs/outputs 12G compliant and SDQS/2SI quad 3G compliant.
  • Return Loss:
    > 15 dB up to 1.485 GHz
    > 10 dB up to 3 GHz
    > 7 dB up to 6 GHz
    > 5 dB up to 12 GHz
  • Input Cable Length:
    45m Belden 1694A cable at 11.88 Gbps
    120m Belden 1694A cable at 2.97 Gbps
    240m Belden 1694A cable at 1.485 Gbps
    400m Belden 1694A cable at 270 Mbps
  • Output Signal Level: 800 mV ±10%
  • DC Offset: 0 V ± 50 mV
  • Rise and Fall Time @ 11.88 Gbps: < 45 ps
  • Alignment Jitter (12G/3G/HD/SD): < 0.3/0.3/0.2/0.2 UI
    
    Frame Sync Audio/VIdeo Delay
  • Max offset: 20 frames
  • Latency (min): 1 frame
    
    User Audio Delay Offset from Video
  • Bulk delay control: -33 msec to +3000 msec.
  • Per-channel delay controls: -800 msec to +800 msec
    
    AES Audio Inputs/Outputs
  • (8) 75Ω coaxial ports (max); port direction assignable as inputs or outputs in groups of 4 ports.
    Note: Hardware rev -E and later has 8 AES ports; earlier versions have 4 port max.
    
    MADI Audio Inputs/Outputs
  • (2) 75Ω coaxial ports (max)
    Note: Not all rear modules support full MADI I/O. MADI I/O is a function of Rear Module used and is available only on card with on rev C (or later) hardware with firmware supporting MADI I/O. See Rear Module illustrations for specific information.
    
    HDMI Input (Option -H2S only)
  • HDMI 2.0 Input; mini connector
    
    HDMI Output
  • HDMI 2.0 Output; type A standard connector
    
    GPIO
  • 6 GPI (max); 2 GPO (max)
    Note: GPIO max capacity is a function of Rear Module used. See Rear Module Options tab for specific information.
    
    Frame Reference Input
  • (2) reference from frame bus. SMPTE 170M/318M "Black Burst", SMPTE 274M/296M "Tri-Level"
    
    Frame Loading (Max. recommended number of 9904 cards supported per Frame Model)
    -OG3 Frame: (5) cards
    -HPF-9000 Frame: (5) cards
    -oGx Frame: (7) cards
    Note: In all cases, it is recommended to leave a 1RU gap above the frame and set frame Network Controller Card to run the frame cooling fans at full (max.) speed.
   

• Item Includes:

  • 1x Cobalt 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync/Embed/De-Embed Audio Processor
  • 1x Cobalt INDIGO 2110-DC-01 factory add-on
   

• Warranty:

  • Five year warranty