Remote control your system from any location. The Ashly neWR-5 wall remote control fits in standard wall boxes. White faceplates can be covered with a standard decora plate (not included). This device has two Up/Down buttons for volume level, preset selection, etc. A two-character alphanumeric display gives the operator a visual indication that verifies the desired changes have been accepted by the system.
Six programmable function select buttons with LEDs can each be programmed for one of the following functions: Preset Recall - Immediately recall an assigned preset. Preset Scroll - Allows user to select any of the allowed presets via the up/down arrow button shown by the alphanumerical display. Gain Control - Allows volume control of assigned inputs/matrix mix/outputs. Channel Mute - Allows mute control of assigned inputs/outputs. Zone Source Selection - Allows for on/off control of assigned inputs, but only for a specific output. Logic High or Low for the ne24.24M processor. Connecting and powering the neWR-5 is done using standard Cat-5 ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch, hub, or inline injector (purchased separately). If PoE is not available, a 15-48VDC power supply can be hardwired directly to each unit (2 watts needed per unit). A hardwired Lock-Out feature on the neWR-5 will render all buttons inactive.
Compatible Ashly Products include:
nXe*, nXp amplifiers
Pema amplifiers
NE multi-channel amplifiers*
NE two-channel amplifiers*
ne24.24M matrix processor
NE8800/4800 network processors