Leader LT4610SER01 GPS and Time Code Option for LT4610

ITEM #: LR-LT4610SER01 MFG #: LT4610SER01

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the LR-LT4610SER01

LT4610SER01 - Overview

The LR-LT4610SER01 option adds GPS Sync Input, 10 MHz CW Sync Input and LTC Input/Output functions to the LR-LT4610. The time-code generator function is synced to Internal Time Information or GPS's Time Information, and available to generate ATC (LTC, LTC and AES/EBU Embedded Time-code) on the time information of GPS. This option is also equipped with a Holdover Function so that GPS signal and the CW signal phase and frequency will be held when there is a loss of signal.

  • Specifications:

    • GPS Sync
    • Compliance Standards: SMPTE ST 2059
    • GPS Input
    • Input Connector: 1 x BNC
    • Input Impedance: 50Ω
    • Antenna, Pre-amplifier: Power Supply
    • Voltage: 5V, 3.3V, OFF
    • Electric Current: 50 mA max. (built-in overcurrent protection circuit)
    • GPS Receiving
    • Reception Frequency: 1575.42MHz (L1)
    • Reception Code: C/A code
    • Receiving Sensitivity: Up to -130 dBm (input level into antenna)
    • Hold Over Function: When the GPS signal is interrupted, holding the previous frequency and phase.

      10MHz CW Sync
    • CW Input
    • Input Connector: 1 x BNC
    • Input Impedance: 50Ω
    • Input Signal Level: 0.5 to 2Vp-p
    • Input Signal Frequency: 10MHz
    • Frequency Tolerance Range: ±5ppm
    • Hold Over Function: When 10MHz CW signal is interrupted, holding the previous frequency.

      LTC Input/Output
    • Compliance Standards and Output: SMPTE 12M-1 Input
    • In/Output Connector: D-SUB 15 pin (Input and output shared)
    • Number of Input: 1
    • Input Impedance: 10kΩ balanced
    • Input Signal Level: 0.5 to 4 Vp-p
    • Number of Output: 3
    • Output Impedance: 600Ω balanced
    • Output Signal Level: 2 Vp-p±10%

      Time-Code
    • Reference Time: Internal/GPS/LTC
    • Frame Rate: Synced with ANALOG BLACK 1
    • Drop Frame Mode: On, Off
    • ATC/LTC Setting Output Setting: On, Off
    • Timing Adjustment Range: s42ms (Increase and decrease depending on frame rate)
    • Timing Adjustment Unit: 0.01ms
    • AES/EBU Time-code Insert Setting: On, Off
    • Leap Second Apply Setting: Timer setting the application date and time.
    • Summer Time Apply Setting: Timer setting the application date and time.
     

Required Accessories

LT4610SER01 - Required Accessories

Recommended Accessories

Similar Products

California Residents:
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov