Shure AD610 Axient Digital ShowLink 2.4GHz Wireless Access Point - No Power Supply

ITEM #: SH-AD610 MFG #: AD610

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3
Free Shipping with $49 Minimum Order

List Price:

$635.00

Our Price:

$508.00

Availability: In Stock
iAvailability Description Popup


AD610 - Overview

The Shure AD610 ShowLink access point enables real-time remote control of all ShowLink-enabled Axient™ transmitters, including both ADX and AXT series models. The access point allows comprehensive management of transmitter parameters from the receiver or Wireless Workbench® 6 using 2.4GHz (IEEE 802.15.4) wireless network communication. All parameter changes occur without interruption to the performer.

Multiple access points can extend the operational range or increase the number of transmitters supported on the ShowLink network. The access point also features true diversity antenna inputs along with mounting points for 1/4"-20 and M6 x 1.0 thread.

  • Features:

    • Real-time wireless remote control of up to 24 transmitters per ShowLink access point
    • New RF design and true diversity antenna scheme for improved link performance
    • Easy transmitter authentication - Recognizes linked transmitters upon IR sync
    • Provides coverage area approximately the same as the transmitter's range
    • Automatic hand-offs between multiple access points extend operating range
    • Automated channel selection - Independently scans 2.4GHz frequency range and determines best channel for use
    • Automatic frequency agility - Moves a ShowLink network to the best available 2.4GHz channel in the event of signal degradation
    • Wireless Workbench 6 software supports networked control of all device functions and provides a ShowLink plot for viewing 2.4GHz signal levels
    • Receives power via Power over Ethernet (PoE) network connection or from an external power supply
    • Versatile mounting options - Fits microphone stand adapters and has built-in 1/4"-20 and M6 x 1.0 threading for installation
    • Backwards compatible with Axient analog transmitters and receiver
     
  • Specifications:

    • Antenna Type: 2 Omnidirectional 2.4GHz
    • Capacity: 24 Axient ShowLink Transmitters (AXT or ADX Models)
    • Mounting Type: WA371 Mic Clip or 1/4"-20 thread mount
    • Housing: Extruded Aluminum
    • Ingress Protection Rating: IPX3
    • Network Type: IEEE 802.15.4
    • Network Interface: Ethernet 10/100Mbps
    • Network Addressing Capability: DHCP or Manual IP address (configurable using Wireless Workbench)
    • Frequency Range: 2.40 - 2.4835GHz (16 channels)
    • RF Output Power: 10dBm ERP/20dBm ERP (dependent on applicable country regulations)
    • Working Range:
      Under Typical Conditions: 500ft (150m)
      Line of Sight, Outdoors for a Single System: 1600ft (500m)
      *NOTE: Actual range depends on RF signal absorption, reflection and interference
    • Antenna Connectors: 2 SMA (Shell = Ground, Center = Signal)
    • Impedance: 50Ω
    • Scanner RF Sensitivity: -106dBm, typical (integrated antenna)
    • Operating Temperature Range: 0°F - 140°F (-18°C - 60°C)
    • Storage Temperature Range: -20°F - 165°F (-29°C - 74°C)
    • Power Requirements:
      Power over Ethernet (PoE) Class 1: 36 - 57V DC/V AC
      External Power Supply (if PoE is unavailable): 15V DC (600mA), double insulated
    • Dimensions (HxWxD): 7.48" x 4" x 1.85" (190mm x 102mm x 47mm), without antennas
    • Weight: 16.3oz (464g), without antennas
     
  • Item Includes:

    • Wireless Microphone Clip
    • 5/8" - 3/8" Thread Adapter
    • Shielded 25ft Ethernet cable for ShowLink Access Point; RJ45-to-EtherCon connector
     
  • GTIN:

    0042406501316
     

California Residents:
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov