Brainstorm SR-112 Plus SR-TCG Plus SP/SR112 SR-112 Distripalyzer with Time Code Generator AND Serial Port Preinstalled

SR-112+SR-TCG+SP/SR112 - Overview

A Timecode Reader, Distributor, Reshaper, Analyzer and Generator

• Features:

  • 1 x 12 Distributor / Reshaper
  • Designed to send clean time code over long cables
  • Eliminates level fluctuations
  • Buffered outputs; balanced or unbalanced
    
    Time Code Analyzer
  • Identifies time code format, reports errors (drop outs.)
  • Monitors video phase
  • Generates a comprehensive report via Ethernet
    
    Time Code Generator
  • Generates new time code with or without video reference
  • Repairs faulty time code (jam sync)
   

• Specifications:

  • SR-112 Time Code Distripalyzer
  • TC Distributor: 1x12
  • TC Input Connector: XLR Female
  • TC Output Connectors: 1 x DB-25 F (8 outputs - Tascam/Avid analog pin configuration), 2 x XLR M, 2 x 1/4" TRS
  • Input Signal: SMPTE/EBU Longitudinal Time Code
  • Impedance: 20KO bal.; 10KO unbal.
  • Level: -30dbU min; +20dbU Max
  • Output Signal: Waveform: switchable rise time: 1us (square); 25us (SMPTE); 50us (EBU)
  • Impedance: 600O bal.; 300O unbal.
  • Level: adjustable: full off to +8dbU bal.; to + 2dbU unbal.
  • Amplitude distortion: less than 2%
  • Status LEDs: Reshape Generate (TCG option) Video In Repair (TCG option) TC In Ethernet
  • Warning LEDs: Input Error (red) Video Drift (red) Video Phase (yellow) Video Termination Off (yellow)
  • Time Code Reader: The 8 digit LED Display indicates hours, minutes, seconds and frames. The display also flashes error descriptions when detected.
  • LCD Display
    In addition to being used for SET UP, the 32 character LCD display indicates the following:
    Format and rate of the incoming time code
    Format and rate of the video reference
    User Bits
    Video Phase
    List of errors
  • Connectors
    Time Code in: XLR Female (x 1)
    Video Ref: BNC (x 1)
    Time Code outputs:
    DB25 (1x) - Tascam/Avid analog pin configuration: outputs 1-8
    XLR Male (2x): outputs 9-10
    1/4" jacks (2x) - TRS: outputs 11-12
    Ethernet: RJ45 jack (x 1)
    Power: 4 pin circular (x 2)
  • Power: 12VDC @ 3A
  • Redundancy: two separate supplies can be connected to the 2 separate power inputs. If one supply fails, the other takes over and an error is reported. The faulty supply can be swapped without having to power down.
  • Dimensions: 19" x 8.125" x 1.75" (48.26 cm x 20.64 cm x 4.45cm)
    
    Time Code Generator
  • Modes of Operation: Generate Repair
  • Generator Formats
    24 fps - speed: 23.976
    24 fps - speed: 24.000
    25 fps - speed: 25.000
    30 DF - speed: 29.970
    30 ND - speed: 29.970
    30 DF - speed: 30.000
    30 ND - speed: 30.000
  • Repair Modes
    Copy - continuously copies the time code input, as long as it continues to increment.
    Jam - a one-time copy of the input time code is transferred, then generator increments as in GENERATE mode.
    Show - a special setting for live shows where no frames are skipped or duplicated
  • Repair Flywheel Times: 5 Fr, 15 fr, Infinity
  • Repair Ramp up Time: None to 9.5 sec in 0.5 sec increments
   

• Item Includes:

  • 1x SR-112 Distripalyzer with TCG + Serial Port Preinstalled
  • 1x Power Supply