Symetrix XIO STAGE 4X4 Dante I/O Endpoint - 4 Mic/Line In - 4 Line Out - PoE - 8 x 8 x4 Inch NEMA

80-0168 - Overview

• Features:

  • Premium 4 In x 4 OUT Dante digital snake
  • Neutrik metal body DL series XLR connectors
  • 14 gauge A1008 steel construction
  • Easy installation - wall or floor mounted - easily mounts in 8" x 8" x 4" NEMA Junction Box with 7" opening
   

• Specifications:

  • Analog Inputs
  • Frequency Response: 20 Hz - 20 kHz, ± 0.5 dB.
  • Channel Separation: > 110 dB @ 1 kHz, +24 dBu.
  • Connectors: Female Neutrik metal body DL series XLR connectors.
  • Number of Inputs: Four (4) switchable balanced mic or line level.
  • Nominal Input Level: +4 dBu with 20 dB of headroom (digital).
  • Maximum Input Level: +23 dBu (1% distortion).
  • Mic pre-amp gain: 0, 12, 24, 44 or 54 dB switchable.
  • Mic pre-amp EIN: < -125dB with 150 ohm source impedance.
  • CMRR: > 76 dB @ 1 kHz, unity gain.
  • Input impedance: 8k Ohms balanced, 4k Ohms unbalanced.
  • Phantom power (per input): +48 VDC 10 mA maximum.
  • Dynamic range: > 116 dB, A-weighted.
  • THD + Noise: < -100 dB, unweighted; 1 kHz @ +16 dBu with 0 dB gain.
  • ADC Latency: 0.30 mS.
    
    Analog Outputs
  • Frequency Response: 20 Hz - 20 kHz, ± 0.5 dB.
  • Channel Separation: > 110 dB @ 1 kHz, +24 dBu.
  • Connectors: Male Neutrik metal body DL series XLR connectors.
  • Number of outputs: Four (4) balanced line level.
  • Nominal output level: +4 dBu with 20 dB of headroom.
  • Maximum output level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
  • Output impedance: 300 Ohms balanced, 150 Ohms unbalanced.
  • Dynamic range: > 116 dB, A-weighted.
  • THD + Noise: < -94 dB, unweighted; 1 kHz @ +20 dBu with 0 dB gain.
  • DAC Latency: 0.60 mS.
    
    System
  • Sampling Rate: 48 kHz.
  • Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters.
  • Latency: 1.92 mS (input to output, 1mS Dante latency).
    
    Mechanical
  • Space Required: Minimum requirement of 8"x8"x4" electrical enclosure.
  • Electrical: PoE IEEE 802.3af Class 0, 10 Watts maximum. No line voltage switching required (100-250 VAC, 50-60 Hz)
  • Compliance: UL 60065, cUL 60065, IEC 60065, FCC 15.109, FCC 15.109(g), FCC 15.107, EN 55032, EN 55103-2, EN 61000-3-3, EN 61000-3-2, ICES-003, RoHS
   

• Item Includes:

  • 4x #10-32 x 3/8" Black Phillips Screws
  • 4x #10 black rubber washers
  • 2x Male XLR dummy plugs
  • 2x Female XLR dummy plugs
  • 6x 5.6" black cable ties
   

• Warranty:

  • 5 years