Blonder Tongue HDE-4S-PRO High Definition Encoder with Low Latency Option

6372 LL - Overview

• Features:

  • Accepts up to four (4) programs: 4xHD-SDI
  • Supports HD-SDI input loop thru for monitoring
  • Simultaneously delivers the following outputs: 4xQAM (Adjacent), 4xIP (SPTS), and 4xASI
  • Multiplexes up to four (4) input programs in any of the following output combinations: (i) 1:1 (1 program per QAM channel); (ii) 2:1 (2 programs per QAM channel, not exceeding 38.8 Mbps)
  • Each of the four (4) QAM channels can (i) contain 1 or 2 programs, and (ii) be turned on/off individually
  • Provides 40 dBmV QAM output level for four (4) combined channels
  • Supports custom video and transport stream bit rate settings
  • Supports user-defined PSIP configuration
  • Supports Real-time Dolby® Digital audio encoding
  • Supports Closed Captioning EIA-608 and EIA-708
  • Equipped with EAS interface (Analog Video + L/R Audio)
  • Provides comprehensive GUI-based monitoring and control via standard Web browsers
   

• Specifications:

  • Input
  • HD-SDI Connectors:10x BNC total (4 inputs + 1 Spare in/loop thru)
  • Standard: SMPTE 292M
  • Video Resolution: 480i, 720p, & 1080i
  • Audio: Embedded PCM and pass-through Dolby® Digital only
  • EAS (Emergency Alert System) Connectors: 3x RCA (Video, Audio L & R)
  • Trigger Mechanism: 5-12 VDC & Dry Contact Closure (Terminal Strip)
  • Video Output Format: MPEG-2 HD MP@ML; ISO 13818-2
  • Chroma: 4:2:0
  • Resolution: 480i, 720p, & 1080i
  • Frame Rate: 29.97 fps (480i); 29.97 fps (1080i); 59.97 fps (720p)
  • Aspect Ratio: 4:3 & 16:9
  • GOP Structure: I & P frames (user-selectable)
  • Video Bit Rate: Variable (user-selectable)
  • Video Pre-filter: Variable (user-selectable)
  • Color Space: YCbCr and RGB
  • Audio Output Format: Dolby® Digital
  • Sampling Rate: 48 kHz
  • Bit Rate: Variable; 96-448 Kbps (user-selectable)
  • Closed Captioning HD-SDI: EIA-708; Embedded in HD-SDI input
    
    Output
  • QAM Connector: 1x "F" Female (rear panel; up to 4x RF QAM ch. combined)
  • Modulation: QAM 16, 32, 64, 128, and 256
  • Standards: ITU-T J.83; Annex A and B
  • DVB Symbol Rate: Variable; up to 7 MSymbol/sec (MBaud)
  • Frequency Range: 54 to 1002 MHz
  • Tuning: CATV Channel Selectable (Ch. 2 to 158)
  • Channels' Bandwidth: 24 MHz (4x Adjacent 6 MHz)
  • RF Level: 40 dBmV (4 ch. combined)
  • RF Level Accuracy: ± 1 dB
  • Frequency Tolerance: ± 0.5 kHz @ 77 °F (25 °C)
  • Frequency Stability: ± 5 kHz over 32 to 122 °F (0 to 50 °C)
  • Amplitude Flatness: ± 0.25 dB (over 6 MHz channel)
  • Phase Noise: -98 dBc (@ 10 kHz)
  • Spurious: -60 dBc
  • Broadband Noise: -70 dBc (@ +52 dBmV output level, 5.5 MHz bandwidth)
  • Impedance: 75 Ω
  • Spectral Inversion: Auto Recognition
  • Carrier Suppression: 45 dB
  • Return Loss: 14 dB typical
  • Signal-to-Noise Ratio (SNR): 40 dB typical
  • MER: 40 dB typical
  • I/Q Phase Error: Less than 1 degree
  • I/Q Amplitude Imbalance: Less than 1%
  • ASI Connectors: 4x BNC (Front-panel)
  • Format: DVB-ASI
  • Standard: ETSI EN 50083-9
  • TS Bit Rate: Variable (user-selectable)
  • IP Connector: 1xRJ45
  • Standard: 1000Base-T Ethernet (GigE)
  • TS Bit Rate: Variable (user-selectable)
  • Network protocols: UDP, RTP Multicast, Unicast (4 SPTS or combination of SPTS and MPTS outputs)
  • Encoder Latency Standard: 900 msec
  • Low Latency (LL) Option: 250 msec
    
    General
  • Dimensions (W x D x H): 19.0 x 18.125 x 1.75 inches (483 x 460 x 44 mm)
  • Power: 115-230VAC, 60/50Hz (Fuse:3.0A, 250VDC, Slo Blo)
  • Power Dissipation: 65 W (QAM/IP version)
  • Weight: 10 lbs (4.54 kg)
  • Operating Temperature: 32 to 122 °F (0 to 50 °C)
  • Storage Temperature: -13 to 158 °F (-25 to 70 °C)
  • Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensing
  • Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensing