Multidyne FS-3X3-TRXA-ST 3 x 3 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 3 inputs & 3 outputs (BNC or optical) over 1 fiber. The FiberSaver series was designed and built to help engineers and designers to be able to recover from situations where there are many signals to move over fiber, but not enough available fibers due to a lack of access to run more fiber or full cable trays. With our new FiberSaver, input any digital optical signal with a data rate of up to 4.25Gb/sec and it will be received and then re-transmitted at a CWDM wavelength and launched into the CWDM multiplexer. At the other end of the link, the signal is then demultiplexed and restored. Up to 18 optical signals can be combined without the complexity of having specific CWDM lasers...and their spares... for each of your optical sources.Alternately, you can use the BNC inputs and outputs to transport up to six SDI signals up to full, uncompressed 3Gb/sec, on just one fiber. And the built-in reclockers ensure that your signals arrive in pristine condition. Since the FiberSaver is receiving and then retransmitting the optical signal, you get a fresh optical budget that allows transmission over even longer distances. And this doesn't work just for MultiDyne equipment. Any optical signal that is digital (even
analog signals that are digitally en-coded) and less than 4.25Gb/sec can be used. Older multimode systems? Yes! MADI audio signals? Yes! The Fiber Saver Series. The most economical way to maxi-mize your fiber usage today while providing excess capacity for tomorrow.
Please note! Item shown is for reference only. Shown is a 6 channel version of the FS-3X3-TRXA/B-ST.